Weighing equipment
- Included in delivery:
- • 1 Drucksensor
• 5 m Wiegesignalkabel mit wasserfester Schraubsteckverbindung
• 1 Wiegeanzeige
• 2 m Stromversorgungskabel
• 1 Handbuch - Technical data:
- Drucksensor:
• Robuster und zuverlässiger Drucksensor
• Hydraulikdruck bis 250 bar
• Kennwert 1,5 mV/V
• Überlast 120 %, Bruchlast 150 %
• Genauigkeit +/- 0,1 %
• Einsatztemperatur -20 bis +65 °C
• Temperaturkompensiert -10 bis +50 °C
• Anschluss M14x1,5
Wiegeanzeige:
• Robuste, handliche Anzeige im Aluminiumgehäuse
• Verstellbare Halterung
• E-Ink Display
• Sechsstelliges Gewichtsanzeige mit 16 mm Ziffernhöhe
• eigene Summenanzeige mit 5 mm Ziffernhöhe
• Spannungsversorgung über 12 V Bordelektrik oder 9 V Batterie
• Einsatztemperatur -10 bis +50 °C
• Stabilisierte Gewichtsanzeige
• Auflösung 5 kg
• Tarieren auf Knopfdruck (Nullstellen des leeren Gerätes)
• Summierfunktion
• Einfache Kalibrierfunktion
• Bluetooth-Schnittstelle
• Maße ohne Montageteile: 155 x 70 x 45 mm (BxHxT)
Genauigkeit:
• Genauigkeit des Drucksensors +/- 0,1 %
• Genauigkeit des Gesamtsystems im praktischen Einsatz ca. +/- 2 % bei ordnungsgemäßer Anwendung
• Auflösung der Wiegeanzeige 5 kg - Version:
- Pressure sensor:
Max. pressure: 250 bar
Safe overload: 120%
Accuracy: 0.1%
Operating temperature: -20 to +65°C / -4 to +149°F
Hydraulic connection: M14 x 1.5, internal angle 37 degrees
Cable length: 4 m
Display:
Material: plastic housing
Display: 6-digit backlit LCD display, digit height: 20 mm
Power supply: 12 to 24 V
Power cable: 2 m
Operating temperature: -10 to +50°C / +14 to +122°F
Dimensions: 164 x 77 x 81 (L x W x H)
Functions: zero point, tare, stable weight while driving, totalling, external input for totalling - Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Included in delivery:
- • 4 weighing feet
• 1 connection box
• 6 m weighing signal cable
• 1 waterproof screw plug for connection to the weighing display
• 1 weighing display HD1
• 1 manual - Technical data:
- Weighing base:
• Internal load cell
• Stainless steel support disc
• Stainless steel mounting plate with fixing bolts
• Rubber sleeve as additional protection for the load cell
• M14 thread with nuts and washers for height-adjustable assembly of the feet
• Total height of the weighing base 98 mm
• Diameter of the weighing base 70 mm
Load cells:
• Encapsulated, welded compression load cell with load introduction
• Robust design made of nickel-plated tool steel
• Dustproof and waterproof in accordance with protection class IP68
• Nominal load per load cell 2000 kg
• Safe overload 150 %, breaking load 300 %
• Characteristic value 2 mV/V
• Operating temperature -35 to +70 °C
Connection box:
• Waterproof connection box
• Connection terminals for load cells and weighing signal cable
• Potentiometer for corner adjustment of the load cells
• Cable outlets with cable glands
Weighing signal cable:
• 4-pole cable 4 x 0.5 mm²
• Outer diameter 7.6 mm
• Specially sheathed
• UV-resistant
• Small bending radius
• Non-slip
Weighing indicator HD1:
• Display and mounting bracket made of stainless steel
• Dustproof and waterproof according to protection class IP67
• 6-digit LCD display with 25 mm digit height and backlight
• Resolution 1 kg
• Automatic zero setting selectable when switching on
• Manual zero setting
• Zero point stabilisation
• Totalisation
• Animal weighing mode with adjustable parameters
• Energy saving mode
• Power supply via built-in power supply
• Data output via RS232 interface for large display, PC or PLC
• Battery/rechargeable battery operation possible with 2 x 1.5 V AA
• Battery cover accessible from outside
• Dimensions including bracket (W x H x D) 258 x 178 x 58 mm - Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
- Included in delivery:
- Scale, top link lugs, bolts and linch pins, user manual
- Technical data:
- Lower link spacing continuously adjustable between 85 and 90 cm
• The distance between the top link and the lower link can be continuously adjusted between 48 and 68 cm on the implement side
• Designed for implements similar to a fertiliser spreader up to a total weight of 4500 kg
• Resolution 5 kg
• Accuracy in the field +/- 1 to 2 percent
• Dimensions (horizontal) 104 x 84 x 20 cm (LxWxH)
• Unladen weight approx. 80 kg
12 V scale display technical data: easy-to-read E Ink display, Bluetooth interface*, easy and logical operation, aluminium + stainless steel housing, IP67 protection class, M12 connector for weighing equipment, power supply via 2 m cable with DC vehicle plug (12V) or 9V block battery, stainless steel bracket with 2 ball joints, easy calibration. *The free Agreto Spreader app is also available in the Google Play Store, which can be used to reliably display the application rate based on the distance travelled and the spreading width: https://play.google.com/store/apps/details?id=com.agreto.Spreader. - Version:
- • Mobile scale for three-point tractor hydraulics
• Attachment between tractor (Cat. II and Cat. III) and implement (Cat. II)
• Roller-guided implement attachment with tail hook
• Ideal for weighing loads on fertiliser spreaders, transport crates, silage block cutters, feed mixers and other implements
• Can be adjusted in all directions, meaning that implements not corresponding to the CAT II standard can also be attached
• Transport and operational safety thanks to internal load cells
• Load weighed correctly in any position
• Centre of gravity shifted to the rear by approx. 20 cm
• High-quality powder coating
• Can be combined with various scale displays - Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
- Technical data:
- The Weighlog 300 uses two robust load sensors to measure the pressure and back pressure required to lift the load. The weighing system is normally used in dynamic weighing mode, but can also be used in static weighing mode. In the case of dynamic weighing, the weight is determined during the normal lifting process. At the same time, the lifting speed is detected and compensated. Static weighing involves lifting and stopping the lifting process in a specific position.
Voltage supply: 11 to 30 V DC
Temperature range: -20 °C to +50 °C Working range
System accuracy: ± 1% of the maximum lifting capacity of the machine
Pressure sensor range: 0 to 250 bar
Warranty: 2 years
Protection classes: main unit IP67, full RFI / EMI protection - Version:
- The Weighlog 300 is a mobile weighing system that weighs goods by measuring the hydraulic pressure during the loading process. The Weighlog 300 has two pressure sensors for simultaneous measurement on the pressure and counter-pressure side. During dynamic lifting (no stop in the weighing position), the Weighlog 300 takes the variable lifting speed into account. Dynamic and/or static weighing is possible depending on the machine type and application. Weighing is possible while travelling (slowly) on a smooth and level surface. The ICP 300 serial printer (11671780) can be connected for documentation purposes. The Weighlog 300 is suitable for front loaders, skid steer loaders and wheel loaders, among others.
- Picture no.:
- 1
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
Special item: cannot be returned or cancelled. Additional shipping costs may be incurred. Delivery time subject to availability from the supplier.
- Version:
- The ICP 300 cabin printer is a compact thermal transfer printer that is well suited for use in harsh environments. It is characterised by its robustness and simple operation. With the ICP 300, you can print out your weighing chart directly on the machine. It eliminates time-consuming manual recording and avoids recording errors. The printout is quiet and fast, has a high resolution and the time and date are displayed automatically. This simplifies invoicing and quality assurance through data recording. The ICP 300 can be installed horizontally and vertically. It has a shock-resistant housing and a robust mechanical system.
- Picture no.:
- 2
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Special item: cannot be returned or cancelled. Additional shipping costs may be incurred. Delivery time subject to availability from the supplier.
OEM numbers are provided for reference purposes only. GRANIT replacement parts are not intended to be sold as OEM parts. Wilhelm Fricke SE is the manufacturer of all own brand items. All prices are in $, excl. VAT. Errors reserved. Delivery subject to availability.