SLPD 20/20-64/32 DIN SAVTEC

• Independent of direction of rotation
• A cost-effective total solution compared to conventional assembly with two pumps in one transfer case
• Very low noise level
• Smooth running throughout the entire speed range
• Long service life due to optimized selection and design of bearings, Seals etc.
• O-rings on all sealing surfaces as well as a double shaft seal reliably prevent leaks on pump and auxiliary drive
• The Savtec valve can also be used as an emergency stop
• Mounting kit and flange seal included in the scope of delivery.

SLPD 20/20-64/32 DIN Savtec is equipped with a SAVTEC shut-off valve.
SL 200 with Savtec valve allows the pump to be controlled in such a way that it only supplies oil when it is needed.
SLPD 20/20 – 64/32 is available with Savtec valve for electrical 24 V or pneumatic remote control. The signal is supplied by a switch in the control panel or automatically, e.g. by the handbrake, a pressure transmitter or an electronic circuit. With a closed Savtec valve, neither a flow nor a pressure is generated and therefore the auxiliary drive is not loaded. This has a positive impact on energy costs.
SLPD 20/20 – 64/32 DIN Savtec contains additional lubrication channels for the bearings, so that the pump can also be lubricated with the Savtec valve closed during operation. Maximum operating pressure, depending on the version is 330-350 bar.