SUNFAB Dual-circuit pump SCPD 76/76 DIN
Part no.: 257SCPD76/76
Further information
- Type:
- 76/76
- Theoretical oil flow (l/min) at pump rpm (500/1000/1500):
- 37.5 + 37.5 = 75 / 75.0 + 75.0 = 150 / 112,5 + 112,5 = 225
- Displacement (cc/rev):
- 75 + 75
- Max. pump speed (rpm) continuous/peak:
- 1500 / 1700
- Operating pressure max. (bar):
- 350
- Torque (M) Nm:
- 34,5
- Drive shaft:
- 8x32x36
- Direction of rotation:
- Left
- Pump type:
- SCPD
- Max. speed (1/min.):
- 1500
- Inlet connection:
- Aufnahme für Saugstutzen
- Outlet connection:
- G 3/4" (BSP)
- Version:
- Zweikreispumpe
- Adaptor plate hole pattern (mm):
- 80x80 (4-Loch)
- Fitting Ø (mm):
- 80
- Type:
- Konstantpumpe
- Volume flow max. (l/min):
- 112 + 112
- Weight:
- 23,50 kg
- Catalogue:
- Hydraulics & pneumatics (p. 946)
• Rotation direction change: no
• Large displacement allows low motor speeds and low noise
• Long service life thanks to careful material selection, such as bearings, seals etc.
• O-rings on all contact surfaces and double shaft seals prevent oil leaks from pump and auxiliary drive
• best displacement/size ratio on the market
• Mounting kit and flange seal included in scope of delivery.
SCPD 76/76 DIN is a two-circuit pump with two separate flow rates of the same size.
SCPD 76/76 DIN generates a maximum flow rate of 127 + 127 = 254 l/min and is designed for a maximum operating pressure of 350 bar. It allows for effective direct mounting to gears with coupling and uncoupling auxiliary drives.
SCPD 76/76 is a modern and compact pump that meets the high market requirements for flow rate, pressure, efficiency and low installed dimensions. Their speed is optimised for a left (L) or right (R) version with the corresponding direction of rotation.
• Large displacement allows low motor speeds and low noise
• Long service life thanks to careful material selection, such as bearings, seals etc.
• O-rings on all contact surfaces and double shaft seals prevent oil leaks from pump and auxiliary drive
• best displacement/size ratio on the market
• Mounting kit and flange seal included in scope of delivery.
SCPD 76/76 DIN is a two-circuit pump with two separate flow rates of the same size.
SCPD 76/76 DIN generates a maximum flow rate of 127 + 127 = 254 l/min and is designed for a maximum operating pressure of 350 bar. It allows for effective direct mounting to gears with coupling and uncoupling auxiliary drives.
SCPD 76/76 is a modern and compact pump that meets the high market requirements for flow rate, pressure, efficiency and low installed dimensions. Their speed is optimised for a left (L) or right (R) version with the corresponding direction of rotation.
Special item: cannot be returned or cancelled. Additional shipping costs may be incurred. Delivery time subject to availability from the supplier.