Deutz
Special item: cannot be returned or cancelled. Additional shipping costs may be incurred. Delivery time subject to availability from the supplier.
- Technical data:
- Max. operating pressure: 220 bar
Max. return pressure: 50 bar
Nominal flow rate: max. 60 l/min.
Tightening torque: 30 Nm
Connections: M18 x 1.5
Dimensions: 230 x 120 x 50 mm
Positive switching overlap
Hydraulic oil according to DIN 51524 - Description:
- This control valve has been specially developed for Deutz tractors with SD60 hydraulics. Thanks to the high output up to four pieces can be flanged directly. As the hole pattern is identical to Deutz, this valve can also be mixed with Deutz SD-60 valves. The aforementioned control valve is a four-position valve, and can be switched via hand wheel from double-acting to single-acting and vice versa. It is a gate-sealed control valve with neutral fine control that allows very low fit leakage, even at the highest pressure. The device has a latched safety limit switch in the lifting position. When switching via the lowering position, the latched float position is reached. This can be returned by hand to the neutral position at any time.
- Dimensions:
- 230 x 120 x 50 mm
- Connection thread:
- M18 x 1.5
- Operating pressure max. (bar):
- 220
- Fixing bolt tightening torque Nm:
- 30
- Nominal flow rate (l/min.):
- 60
- Operating temperature (°C):
- -20...+80
- Viscosity:
- 10...200 mm2/s
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Technical data:
- Max. operating pressure: 220 bar
Nominal flow rate: max. 40 l/min.
Tightening torque: 25 Nm
Dimensions: 220 x Ø 57.9 mm - Menke no.:
- 68334
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
- Technical data:
- Max. operating pressure: 220 bar
Nominal flow rate: max. 40 l/min.
Tightening torque: 25 Nm
Dimensions: 220 x Ø 57.9 mm - Description:
- The control valve is used in the tractor to control and regulate the power lift unit. It can also be used to lift and lower implements - attached to the lifter - continuously, to maintain a predetermined position, or to achieve optimum utilisation of the tractor power. Disturbances are corrected automatically, which makes driving easier. The control valve can be used for position control, traction control or mixed control depending on the application.
- Operating pressure max. (bar):
- 220
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Technical data:
- Max. operating pressure: 220 bar
Nominal flow rate: max. 40 l/min.
Tightening torque: 25 Nm
Dimensions: 220 x Ø 57.9 mm - Menke no.:
- 68334
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
- Technical data:
- Max. operating pressure: 220 bar
Nominal flow rate: max. 60 l/min.
Tightening torque: 30 Nm
Connections: M18 x 1.5
Dimensions: 130 x 220 x 50 mm - Dimensions:
- 130 x 220 x 50 mm
- Connection thread:
- M18 x 1,5
- Description:
- Dieses Zusatzsteuergerät ist ein 5/4-Wegeventil, welches zur Steuerung von Zylindern und Hydromotoren manuell eingesetzt wird. Es besitzt schiebergedichtete Verbraucheranschlüsse A und B. Dies bedeutet, dass eine äußerst geringe Leckage bei hohen Lasten zulässig ist. Das Gerät hat eine Rasterstellung in der Position Heben, die mit hydraulisch-automatischer Endabschaltung bestückt ist. Schaltet man über die Senkenposition weiter, wird die gerastete Position Schwimmstellung eingeschaltet, (Verbraucheranschlüsse A und B miteinander verbunden zum Rücklauf). Die Position Schwimmstellung kann sowohl bei doppelt wirkenden als auch bei einfachwirkenden Hubzylindern als gerastete Senkenstellung benutzt werden.Die Senkenposition B hat eine Rastung ohne hydraulische Endabschaltung. Das Zusatzsteuergerät ist von doppelt wirkend auf einfachwirkend und umgekehrt umstellbar. Dies ist auch während des Betriebes möglich. Der Bedienungshebel ist im Lieferumfang enthalten.
- Operating pressure max. (bar):
- 220
- Fixing bolt tightening torque Nm:
- 30
- Nominal flow rate (l/min.):
- 60
- Bosch no.:
- 19009 04358546
- Operating temperature (°C):
- -20...+80
- Viscosity:
- 10...200 mm2/s
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Technical data:
- Max. operating pressure: 220 bar
Nominal flow rate: max. 70 l/min
Tightening torque: 30 Nm
Connections: M22 x 1.5
Dimensions: 275 x 40 x 110 mm - Description:
- This auxiliary control unit is a four-position device that can be used for double- and single-acting lifting cylinders. It has gate-sealed cylinder connections A and B. This means extremely low leakage rates are permissible at high loads. The device has a detent position in the lifting position that is equipped with an automatic hydraulic limit switch, and that releases at 180 bar. When switching via the lowering position, the locked float position is engaged. This is not unlocked hydraulically (consumer connections A and B are connected together to the return line). The float position can be used on double- and single-acting lifting cylinders as locked lowering position. The auxiliary control unit can be switched from double- to single-acting and vice versa. This is also possible during operation. The valve can be mounted on the left or right side using a freely positionable sealing plate.
- Dimensions:
- 275 x 40 x 11 mm
- Connection thread:
- M22 x 1,5
- Operating pressure max. (bar):
- 220
- Fixing bolt tightening torque Nm:
- 30
- Nominal flow rate (l/min.):
- 70
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Technical data:
- Max. operating pressure: 210 bar
Nominal flow: min. 90 l/min.
Operating material: hydraulic oil
Tightening torque: 30 Nm
Connections: M22 x 1.5
Dimensions: 260 x 40 x 150 mm - Description:
- This auxiliary control unit is a 5/4-way valve which is manually operated to control cylinders and hydraulic motors. This auxiliary control unit is a four-position control unit that can be used for double-acting and single-acting lifting cylinders. It has O-ring-sealed cylinder connections A and B. This means that no leakage occurs at high loads. The device has a detent position in the lifting position that is equipped with an automatic hydraulic limit switch and releases at 180 bar. When switching via the lowering position, the latched float position is engaged. This is not unlocked hydraulically (consumer connections A and B are connected together to the return line). The float position can be used on both double-acting and single-acting lifting cylinders as locked lowering position. The valve can be mounted on the left or right side using a freely positionable sealing plate. The sealing plate is included.
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Special item: cannot be returned or cancelled. Additional shipping costs may be incurred. Delivery time subject to availability from the supplier.
- Technical data:
- Max. operating pressure: 220 bar
Nominal flow rate: max. 40 l/min.
Tightening torque: 25 Nm
Dimensions: 220 x Ø 58 mm - Menke no.:
- 68333
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
- Technical data:
- Max. operating pressure: 220 bar
Nominal flow rate: max. 40 l/min.
Tightening torque: 25 Nm
Dimensions: 220 x Ø 58 mm - Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
- Technical data:
- Max. operating pressure: 220 bar
Nominal flow rate: max. 40 l/min.
Tightening torque: 25 Nm
Dimensions: 220 x Ø 57.9 mm - Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Special item: cannot be returned or cancelled. Additional shipping costs may be incurred. Delivery time subject to availability from the supplier.
- Technical data:
- Max. operating pressure: 250 bar
Nominal flow rate: max. 50 l/min.
Tightening torque: 30 Nm
Dimensions: 100 x 118 x 25 mm
Fastening: 3x M8 - Description:
- Diese Endsektion ist zum Abschluss einer Wegeventilkombination aus Ventilen erforderlich. Die Endsektion ist mit drei Bohrungen zur Befestigung des Wegeventilblocks ausgerüstet.Die Endsektion leitet den Ölstrom vom Anschluss Druck ( P )zum Anschluss Weiterlauf ( N ) um. Dies ist die einzige hydraulische Funktion.
- Reference no.:
- 19036
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
OEM numbers are provided for reference purposes only. GRANIT replacement parts are not intended to be sold as OEM parts. Wilhelm Fricke SE is the manufacturer of all own brand items. All prices are in $, excl. VAT. Errors reserved. Delivery subject to availability.