When used as intended, rubber, thermoplastic and PTFE hoses are generally suitable for use with organic oils according to VDMA 24568 or ISO 15380, oils based on synthetic esters (HEES), on rapeseed oil (HETG) and on polyglycol (HEPG). However, additives and various operating conditions can limit this stability.
The operator is also responsible for periodical oil management to ensure proper operation of the hydraulics. If quality assurance maintenance is not carried out, wear or even failure can occur, for example due to cavitation or abrasion in the hose connection.
EN 854 - 1TE DIN 20021 part 1
Application:
Low-pressure hydraulic lines, 12 to 25 bar, with low impulses.
• For use with compressed air, mineral oil-based hydraulic oils, synthetic or water-based fluids in hydraulic systems
• Suitable for agriculture, stationary systems and hydraulic systems
• Applicable standard: EN 854 - 1TE DIN 20021 part 1
• Interior construction:
oil- and water-resistant synthetic rubber
• Insert: 1-ply textile braid
• Cover: black, abrasion-resistant synthetic rubber, resistant to oil, water and weather
• Temperature range: -40°C to +100°C
• Intermittently: max. +120°C
Low-pressure hydraulic lines, 12 to 25 bar, with low impulses.
• For use with compressed air, mineral oil-based hydraulic oils, synthetic or water-based fluids in hydraulic systems
• Suitable for agriculture, stationary systems and hydraulic systems
• Applicable standard: EN 854 - 1TE DIN 20021 part 1
• Interior construction:
oil- and water-resistant synthetic rubber
• Insert: 1-ply textile braid
• Cover: black, abrasion-resistant synthetic rubber, resistant to oil, water and weather
• Temperature range: -40°C to +100°C
• Intermittently: max. +120°C
Part no.
Nominal width
Outer Ø (mm)
Operating pressure max. (bar)
Burst pressure (bar)
Bending radius (mm)
Press fitting (non-skive)
Pack of
Price & availibility
Part no.
Nominal width
DN 25 - 1"
Outer Ø (mm)
34
Operating pressure max. (bar)
15
Burst pressure (bar)
50
Bending radius (mm)
150
Press fitting (non-skive)
87002066
Pack of
Unit:m
Pack of: 1 m
Pack of: 1 m
Part no.
Nominal width
DN 25 - 1"
Outer Ø (mm)
34
Operating pressure max. (bar)
15
Burst pressure (bar)
50
Bending radius (mm)
150
Press fitting (non-skive)
87002066
Pack of
Unit:PP
Pack of: 10 m
Pack of: 10 m
Original spare part numbers are for comparison purposes only. All prices are in $, excl. VAT. Errors reserved. Delivery subject to availability.