When used as intended, rubber, thermoplastic and PTFE hoses are generally suitable for use with organic oils according to VDMA 24568 or ISO 15380, oils based on synthetic esters (HEES), on rapeseed oil (HETG) and on polyglycol (HEPG). However, additives and various operating conditions can limit this stability.
The operator is also responsible for periodical oil management to ensure proper operation of the hydraulics. If quality assurance maintenance is not carried out, wear or even failure can occur, for example due to cavitation or abrasion in the hose connection.
EN 853 2SN
Application:
High-pressure hydraulic line up to 400 bar with compact external diameter.
• For use with mineral oil, synthetic or water-based fluids in hydraulic systems
• Suitable for agriculture, construction machinery, and lifting equipment and machines/systems
• Applicable standard: EN-853-2SN, exceeds SAE 100 R2
• Interior construction: oil- and water-resistant synthetic rubber
• Insert: two steel wire braids
• Cover: black, synthetic rubber, resistant to oil, weather, ozone and abrasion
• Temperature range: Continuously: -40°C to +100°C
• Intermittently: max. +120°C
In accordance with EN 853/857 it is permitted for 25/50 m rolls to consist of a maximum of two lengths. The shorter piece is at least 10 m long.
High-pressure hydraulic line up to 400 bar with compact external diameter.
• For use with mineral oil, synthetic or water-based fluids in hydraulic systems
• Suitable for agriculture, construction machinery, and lifting equipment and machines/systems
• Applicable standard: EN-853-2SN, exceeds SAE 100 R2
• Interior construction: oil- and water-resistant synthetic rubber
• Insert: two steel wire braids
• Cover: black, synthetic rubber, resistant to oil, weather, ozone and abrasion
• Temperature range: Continuously: -40°C to +100°C
• Intermittently: max. +120°C
In accordance with EN 853/857 it is permitted for 25/50 m rolls to consist of a maximum of two lengths. The shorter piece is at least 10 m long.
Part no.
Nominal width
Outer Ø (mm)
Operating pressure max. (bar)
Burst pressure (bar)
Bending radius (mm)
Press fitting (non-skive)
Pack of
Price & availibility
Part no.
Nominal width
DN 12 - 1/2"
Outer Ø (mm)
21,8
Operating pressure max. (bar)
275
Burst pressure (bar)
1100
Bending radius (mm)
180
Press fitting (non-skive)
87002004
Pack of
Unit:PP
Pack of: 50 m
Pack of: 50 m
Part no.
Nominal width
DN 16 - 5/8"
Outer Ø (mm)
25
Operating pressure max. (bar)
250
Burst pressure (bar)
1000
Bending radius (mm)
200
Press fitting (non-skive)
87002005
Pack of
Unit:PP
Pack of: 50 m
Pack of: 50 m
Part no.
Nominal width
DN 16 - 5/8"
Outer Ø (mm)
25
Operating pressure max. (bar)
250
Burst pressure (bar)
1000
Bending radius (mm)
200
Press fitting (non-skive)
87002005
Pack of
Unit:PP
Pack of: 25 m
Pack of: 25 m
Part no.
Nominal width
DN 16 - 5/8"
Outer Ø (mm)
25
Operating pressure max. (bar)
250
Burst pressure (bar)
1000
Bending radius (mm)
200
Press fitting (non-skive)
87002005
Pack of
Unit:PP
Pack of: 25 m
Pack of: 25 m
Part no.
Nominal width
DN 16 - 5/8"
Outer Ø (mm)
25
Operating pressure max. (bar)
250
Burst pressure (bar)
1000
Bending radius (mm)
200
Press fitting (non-skive)
87002005
Pack of
Unit:PP
Pack of: 50 m
Pack of: 50 m
Part no.
Nominal width
DN 20 - 3/4"
Outer Ø (mm)
28,9
Operating pressure max. (bar)
215
Burst pressure (bar)
860
Bending radius (mm)
240
Press fitting (non-skive)
87002006
Pack of
Unit:m
Pack of: 1 m
Pack of: 1 m
Part no.
Nominal width
DN 20 - 3/4"
Outer Ø (mm)
28,9
Operating pressure max. (bar)
215
Burst pressure (bar)
860
Bending radius (mm)
240
Press fitting (non-skive)
87002006
Pack of
Unit:PP
Pack of: 25 m
Pack of: 25 m
Part no.
Nominal width
DN 25 - 1"
Outer Ø (mm)
37,5
Operating pressure max. (bar)
165
Burst pressure (bar)
660
Bending radius (mm)
300
Press fitting (non-skive)
87002007
Pack of
Unit:m
Pack of: 1 m
Pack of: 1 m
Part no.
Nominal width
DN 25 - 1"
Outer Ø (mm)
37,5
Operating pressure max. (bar)
165
Burst pressure (bar)
660
Bending radius (mm)
300
Press fitting (non-skive)
87002007
Pack of
Unit:PP
Pack of: 25 m
Pack of: 25 m
Part no.
Nominal width
DN 32 - 1 1/4"
Outer Ø (mm)
47,6
Operating pressure max. (bar)
125
Burst pressure (bar)
500
Bending radius (mm)
420
Press fitting (non-skive)
87002008
Pack of
Unit:m
Pack of: 1 m
Pack of: 1 m
Part no.
Nominal width
DN 38 - 1 1/2"
Outer Ø (mm)
54
Operating pressure max. (bar)
90
Burst pressure (bar)
360
Bending radius (mm)
500
Press fitting (non-skive)
87002009
Pack of
Unit:m
Pack of: 1 m
Pack of: 1 m
Part no.
Nominal width
DN 50 - 2"
Outer Ø (mm)
66,7
Operating pressure max. (bar)
80
Burst pressure (bar)
320
Bending radius (mm)
630
Press fitting (non-skive)
87002010
Pack of
Unit:m
Pack of: 1 m
Pack of: 1 m
OEM numbers are provided for reference purposes only. GRANIT replacement parts are not intended to be sold as OEM parts. Wilhelm Fricke SE is the manufacturer of all own brand items. All prices are in $, excl. VAT. Errors reserved. Delivery subject to availability.