Hilcoflex Agro
The Hilcoflex Agro and Hilcoflex Agro Extra Smooth are agricultural hoses with a rubberised interior and exterior.
Application:
• Irrigation, especially pivot systems
• Slurry hose
• Sludge and wastewater discharge
• Transport hose for irrigation and drainage
• For heavy-duty applications
Advantages:
• Unrivalled resistance to ageing and ozone
• Excellent abrasion properties, even on hard ground
• Very good resistance to fertilisers, agricultural chemicals and microorganisms
• Very high tensile strength, low pressure loss, low elongation
• Excellent adhesion between rubber coating and fabric inlay
• Robust and durable
Properties:
Fabric inlay:
• Warp: polyester, high-strength, reinforced version
• Weft: polyamide/polyester; circular woven
• The special fabric construction ensures outstanding bond strength, tight bending radii and a significantly lower pressure loss compared with a 100% polyester fabric inlay
• Very low elongation under pressure thanks to special weaving and vulcanisation process
• Completely embedded in the rubber coating, providing optimum protection against mechanical damage
Internal and external rubber coating:
• High-quality NBR/PVC blend, pressed through the textile inlay in a special single-stage extrusion process
• special mixture additives provide superior ageing and ozone resistance
• Interior: very smooth for minimal pressure loss
• Exterior: reinforced cover and strong longitudinal ribs for high abrasion resistance
Operating pressure:
Specifications only apply to the hose (medium: water, 20 °C). For hoses with couplings, the operating pressure may be lower than indicated above due to the rated pressure of the couplings or the type of installation. With compressed air, the maximum operating pressure is 25% of the burst pressure.
Tensile strength: The maximum tensile load during continuous operation should not exceed 1/3 of the tensile strength.
Temperature range: Continuous operation -20 °C to +80 °C (water), temporarily up to +100 °C (water)
Colour: black
Sold by the metre!
Application:
• Irrigation, especially pivot systems
• Slurry hose
• Sludge and wastewater discharge
• Transport hose for irrigation and drainage
• For heavy-duty applications
Advantages:
• Unrivalled resistance to ageing and ozone
• Excellent abrasion properties, even on hard ground
• Very good resistance to fertilisers, agricultural chemicals and microorganisms
• Very high tensile strength, low pressure loss, low elongation
• Excellent adhesion between rubber coating and fabric inlay
• Robust and durable
Properties:
Fabric inlay:
• Warp: polyester, high-strength, reinforced version
• Weft: polyamide/polyester; circular woven
• The special fabric construction ensures outstanding bond strength, tight bending radii and a significantly lower pressure loss compared with a 100% polyester fabric inlay
• Very low elongation under pressure thanks to special weaving and vulcanisation process
• Completely embedded in the rubber coating, providing optimum protection against mechanical damage
Internal and external rubber coating:
• High-quality NBR/PVC blend, pressed through the textile inlay in a special single-stage extrusion process
• special mixture additives provide superior ageing and ozone resistance
• Interior: very smooth for minimal pressure loss
• Exterior: reinforced cover and strong longitudinal ribs for high abrasion resistance
Operating pressure:
Specifications only apply to the hose (medium: water, 20 °C). For hoses with couplings, the operating pressure may be lower than indicated above due to the rated pressure of the couplings or the type of installation. With compressed air, the maximum operating pressure is 25% of the burst pressure.
Tensile strength: The maximum tensile load during continuous operation should not exceed 1/3 of the tensile strength.
Temperature range: Continuous operation -20 °C to +80 °C (water), temporarily up to +100 °C (water)
Colour: black
Sold by the metre!
Part no.
Inner Ø (mm)
Inner Ø (inches)
Outer Ø (mm)
Working pressure (bar)
Burst pressure (bar)
Length (m)
Pack of
Price & availibility
Part no.
Inner Ø (mm)
52
Inner Ø (inches)
2"
Outer Ø (mm)
58,6
Working pressure (bar)
16
Burst pressure (bar)
50
Length (m)
Meterware
Pack of
Unit:m
Pack of: 1
Pack of: 1
Part no.
Inner Ø (mm)
65
Inner Ø (inches)
2 1/2"
Outer Ø (mm)
71,6
Working pressure (bar)
16
Burst pressure (bar)
50
Length (m)
Meterware
Pack of
Unit:m
Pack of: 1
Pack of: 1
Part no.
Inner Ø (mm)
76
Inner Ø (inches)
3"
Outer Ø (mm)
82,6
Working pressure (bar)
16
Burst pressure (bar)
50
Length (m)
Meterware
Pack of
Unit:m
Pack of: 1
Pack of: 1
Part no.
Inner Ø (mm)
90
Inner Ø (inches)
3 1/2"
Outer Ø (mm)
96,8
Working pressure (bar)
16
Burst pressure (bar)
50
Length (m)
Meterware
Pack of
Unit:m
Pack of: 1
Pack of: 1
Part no.
Inner Ø (mm)
102
Inner Ø (inches)
4"
Outer Ø (mm)
109
Working pressure (bar)
16
Burst pressure (bar)
50
Length (m)
Meterware
Pack of
Unit:m
Pack of: 1
Pack of: 1
Part no.
Inner Ø (mm)
114
Inner Ø (inches)
4 1/2"
Outer Ø (mm)
121,4
Working pressure (bar)
15
Burst pressure (bar)
45
Length (m)
Meterware
Pack of
Unit:m
Pack of: 1
Pack of: 1
Part no.
Inner Ø (mm)
152
Inner Ø (inches)
6"
Outer Ø (mm)
159,8
Working pressure (bar)
14
Burst pressure (bar)
42
Length (m)
Meterware
Pack of
Unit:m
Pack of: 1
Pack of: 1
Original spare part numbers are for comparison purposes only. All prices are in $, excl. VAT. Errors reserved. Delivery subject to availability.