GRANIT Bypass valve SC 084-108, 24V
Part no.: 25702843
Further information
- To fit:
- SAP 084-108 DIN, SCP 084-108 DIN/SAE, SAPT 130 DIN, SCPT 130 DIN
- Operating pressure max. (MPa):
- 40
- Solenoid voltage (V):
- 24
- Power (watts):
- 22.5 / 12.5
- Weight (kg):
- 3.0
- Type:
- SC 084-108
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
- Weight:
- 3,28 kg
- Catalogue:
- Hydraulics & pneumatics (p. 949)
- To be found in category:
- Hydraulics & pneumaticsPumps, gears and accessoriesSUNFAB piston pumpsBypass valve
• Can also be operated manually, which allows adjustment in case of a power failure. An automatic emergency function opens the valve in the event of a power failure
• Compact steel design for direct mounting on the pump connection cover to achieve a minimum installation dimension.
• Can be controlled at 0-40 MPa operating pressure in the hydraulic system.
• The symmetrical shape allows the solenoid valve to be mounted in different positions and to be used for both clockwise and anticlockwise pumps.
• SUNFAB bypass is the most versatile bypass valve on the market.
• Sealing kit and hollow screw included in the scope of delivery. SunFab bypass is a relief valve to the SC pump for remote switching between idle and operation.
By-Pass is used in facilities where the auxiliary drive is not switched off during transport.
It is often used on vehicles equipped with hydraulic equipment that can be used during the journey, for example vehicles for road construction, concrete mixers, refuse vehicles, etc. the bypass valve is controlled from the driver's cab and allows oil to be pumped to the vehicle's hydraulic equipment if necessary.
The valve opens a connection between the pressure line and the suction line directly at the pump, so that the pump is relieved. Only a small amount of oil circulates through the existing system to cool the pump.
If a valve with closed centre or high reverse pressure is used, a separate cooling circuit shall be set up according to the instructions on the back of this sheet.
• Compact steel design for direct mounting on the pump connection cover to achieve a minimum installation dimension.
• Can be controlled at 0-40 MPa operating pressure in the hydraulic system.
• The symmetrical shape allows the solenoid valve to be mounted in different positions and to be used for both clockwise and anticlockwise pumps.
• SUNFAB bypass is the most versatile bypass valve on the market.
• Sealing kit and hollow screw included in the scope of delivery. SunFab bypass is a relief valve to the SC pump for remote switching between idle and operation.
By-Pass is used in facilities where the auxiliary drive is not switched off during transport.
It is often used on vehicles equipped with hydraulic equipment that can be used during the journey, for example vehicles for road construction, concrete mixers, refuse vehicles, etc. the bypass valve is controlled from the driver's cab and allows oil to be pumped to the vehicle's hydraulic equipment if necessary.
The valve opens a connection between the pressure line and the suction line directly at the pump, so that the pump is relieved. Only a small amount of oil circulates through the existing system to cool the pump.
If a valve with closed centre or high reverse pressure is used, a separate cooling circuit shall be set up according to the instructions on the back of this sheet.
Special item: cannot be returned or cancelled. Additional shipping costs may be incurred. Delivery time subject to availability from the supplier.