Recent search terms

Log in with customer account

*
*
Forgot your passwordCustomer registration

To fit FSI

FSI bolt

FSI bolt

Part no.:12367954
Version:
Original FSI bolts for fastening the holders. Suitable for the holders of the 21 mm, 25 mm and 29 mm milling teeth.
FSI milling tooth

FSI milling tooth

Part no.:12362836
Reference no.:
10210000
Version:
Original FSI milling tooth including 1 conical disc and 1 nut.
The TRIPLEX milling teeth from FSI can be used 3 times, the blunt outer side of the tooth can be quickly rotated by 120°. A tungsten carbide coating and large cutting edges extend the service life.
FSI milling tooth

FSI milling tooth

Part no.:12367238
Version:
Original FSI milling tooth including 1 conical disc and 1 nut.
The TRIPLEX milling teeth from FSI can be used 3 times, the blunt outer side of the tooth can be quickly rotated by 120°. A tungsten carbide coating and large cutting edges extend the service life.
FSI milling tooth

FSI milling tooth

Part no.:12396655
Version:
Original FSI milling tooth including 1 conical disc and 1 nut.
The TRIPLEX milling teeth from FSI can be used 3 times, the blunt outer side of the tooth can be quickly rotated by 120°. A tungsten carbide coating and large cutting edges extend the service life.
FSI holder

FSI holder

Part no.:12366851
Version:
Original FSI holder with a depth gauge of 39 mm.
The robust tooth holders are firmly fixed to the milling wheel and do not require any further adjustment. Holders must always be changed diagonally in sets so that no imbalance occurs
FSI holder

FSI holder

Part no.:12366933
Version:
Original FSI holder with a depth gauge of 39 mm.
The robust tooth holders are firmly fixed to the milling wheel and do not require any further adjustment. Holders must always be changed diagonally in sets so that no imbalance occurs.
FSI holder

FSI holder

Part no.:12395341
Version:
Original FSI holder with a depth gauge of 45 mm.
The robust tooth holders are firmly fixed to the milling wheel and do not require any further adjustment. Holders must always be changed diagonally in sets so that no imbalance occurs.
FSI holder

FSI holder

Part no.:12420620
Version:
Original FSI holder with a depth gauge of 45 mm.
The robust tooth holders are firmly fixed to the milling wheel and do not require any further adjustment. Holders must always be changed diagonally in sets so that no imbalance occurs.
Original spare part numbers are for comparison purposes only. All prices are in $, excl. VAT. Errors reserved. Delivery subject to availability.