Köckerling
- Length (mm):
- 424,8
- Width (mm):
- 40
- Working width (mm):
- 40
- Thickness (mm):
- 25
- Suitable bolts:
- 1801285812
- Types:
- Trio, Quadro, Vector
- Colour:
- Black
- Dimensions (mm):
- 424.8 x 40 x 25
- No. of holes:
- 2
- Hole spacing (mm):
- 115
- Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Verstärkungsvariante:
- Endurance Carbide
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
Special item: cannot be returned or cancelled. Additional shipping costs may be incurred. Delivery time subject to availability from the supplier.
- Length (mm):
- 344,2
- Width (mm):
- 50- 81,5
- Working width (mm):
- 81,5
- Suitable bolts:
- 18012100810, 1801290810
- Types:
- Trio, Quadro, Vector
- Colour:
- Black
- Dimensions (mm):
- 344.2 x 50-81.5
- No. of holes:
- 2
- Hole spacing (mm):
- 113
- To fit:
- Köckerling, Saphir
- Version:
- • Large hard metal plates on the upper side guarantee maximum wear protection
• Hard metal plate on the underside is embedded in a triangular shape in the base body - breakages are almost impossible
• Complex hardening process: hardening after the soldering process maintains full hardness in the base body.
• Hardness in the base body: 46 HRc throughout (other aftermarket products: 36 HRc)
• Sophisticated soldering process - mixing of soldering material is crucial
• Low-wear design
• Top performance at a great price
• Easy insertion into the soil and lower fuel consumption thanks to consistently sharp tools
• Significantly longer service life compared to standard tools (a factor of 7-10 depending on the soil)
• No readjustment of tool depth due to wear
• Time and cost savings due to fewer share changes
• Made in Germany - Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Menke no.:
- 137828
- Verstärkungsvariante:
- Endurance Carbide
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Length (mm):
- 276
- Width (mm):
- 53/66
- Working width (mm):
- 53/66
- Suitable bolts:
- 1801255810, 18051-12RMU
- Types:
- Vario
- Colour:
- Black
- Dimensions (mm):
- 276 x 53
- No. of holes:
- 2
- Hole spacing (mm):
- 66
- To fit:
- Köckerling
- Version:
- • Large hard metal plates on the upper side guarantee maximum wear protection
• Hard metal plate on the underside is embedded in a triangular shape in the base body - breakages are almost impossible
• Complex hardening process: hardening after the soldering process maintains full hardness in the base body
• Hardness in the base body: 46 HRc throughout (other aftermarket products: 36 HRc)
• Sophisticated soldering process - mixing of soldering material is crucial
• Low-wear design
• Top performance at a great price
• Easy insertion into the soil and lower fuel consumption thanks to consistently sharp tools
• Significantly longer service life compared to standard tools (a factor of 7-10 depending on the soil)
• No readjustment of tool depth due to wear
• Time and cost savings due to fewer share changes
• Made in Germany - Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Verstärkungsvariante:
- Endurance Carbide
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Length (mm):
- 344,2
- Width (mm):
- 40 - 81,5
- Working width (mm):
- 81,5
- Suitable bolts:
- 18012100810, 1801290810
- Colour:
- Black
- Dimensions (mm):
- 344.2 x 40-81.5
- No. of holes:
- 2
- Hole spacing (mm):
- 113
- To fit:
- Köckerling , Saphir
- Version:
- • Large hard metal plates on the upper side guarantee maximum wear protection
• Hard metal plate on the underside is embedded in a triangular shape in the base body— breakages are almost impossible
• Complex hardening process: hardening after the soldering process maintains full hardness in the base body
• Hardness in the base body: 46 HRc throughout (other aftermarket products: 36 HRc)
• Sophisticated soldering process — mixing of soldering material is crucial
• Low-wear design •
Excellent price/performance ratio
• Easy insertion into the soil and lower fuel consumption thanks to consistently sharp tools
• Significantly prolonged service life compared to standard tools (factor 7-10 depending on the soil)
• No re-adjustment of tool depth due to wear
• Time and cost savings through fewer share changes
• MADE IN GERMANY edit colour - Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Verstärkungsvariante:
- Endurance Carbide
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
Special item: cannot be returned or cancelled. Additional shipping costs may be incurred. Delivery time subject to availability from the supplier.
- Length (mm):
- 255
- Width (mm):
- 35-56
- Working width (mm):
- 35-56
- Suitable bolts:
- 1801060810
- Types:
- Allrounder
- Colour:
- Black
- Dimensions (mm):
- 255 x 35-56
- No. of holes:
- 2
- Hole spacing (mm):
- 46
- To fit:
- Köckerling
- Hole Ø (mm):
- 12,5
- Version:
- • Large hard metal plates on the upper side guarantee maximum wear protection
• Hard metal plate on the underside is embedded in a triangular shape in the base body - breakages are almost impossible
• Complex hardening process: hardening after the soldering process maintains full hardness in the base body
• Hardness in the base body: 46 HRc throughout (other aftermarket products: 36 HRc)
• Sophisticated soldering process - mixing of soldering material is crucial
• Low-wear design
• Top performance at a great price
• Easy insertion into the soil and lower fuel consumption thanks to consistently sharp tools
• Significantly longer service life compared to standard tools (a factor of 7-10 depending on the soil)
• No readjustment of tool depth due to wear
• Time and cost savings due to fewer share changes
• Made in Germany - Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Menke no.:
- 245484
- Verstärkungsvariante:
- Endurance Carbide
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Width (mm):
- 227
- Working width (mm):
- 227
- Suitable bolts:
- 1801255810 + 18051-12RMU
- Types:
- Vario
- No. of holes:
- 2
- Hole spacing (mm):
- 72
- Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Verstärkungsvariante:
- Endurance Carbide
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Width (mm):
- 256,5
- Working width (mm):
- 200
- Thickness (mm):
- 10
- Suitable bolts:
- 18063-1265-1
- Types:
- Trio, Quadro, Vector
- Dimensions (mm):
- 256.5 x 10
- No. of holes:
- 1
- Working angle:
- 50°
- Hole Ø (mm):
- 14
- Version:
- • Large hard metal plates on the upper side guarantee maximum wear protection
• Complex hardening process: hardening after the soldering process maintains full hardness in the base body
• Hardness in the base body: 46 HRc throughout (other aftermarket products: 36 HRc)
• Sophisticated soldering process - mixture of soldering material is crucial
• Low-wear design
• Top performance at a great price
• Significantly longer service life compared to standard tools (a factor of 7-10 depending on the soil)
• Time and cost savings thanks to fewer share changes
• Made in Germany - Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Menke no.:
- 266936
- Verstärkungsvariante:
- Endurance Carbide
- Description:
- Topmix
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Width (mm):
- 256,5
- Working width (mm):
- 200
- Thickness (mm):
- 10
- Suitable bolts:
- 18063-1265-1
- Types:
- Trio, Quadro, Vector
- Dimensions (mm):
- 256.5 x 10
- No. of holes:
- 1
- Working angle:
- 50°
- Hole Ø (mm):
- 14
- Version:
- • Large hard metal plates on the upper side guarantee maximum wear protection
• Complex hardening process: hardening after the soldering process maintains full hardness in the base body
• Hardness in the base body: 46 HRc throughout (other aftermarket products: 36 HRc)
• Sophisticated soldering process - mixture of soldering material is crucial
• Low-wear design
• Top performance at a great price
• Significantly longer service life compared to standard tools (a factor of 7-10 depending on the soil)
• Time and cost savings thanks to fewer share changes
• Made in Germany - Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Menke no.:
- 266935
- Verstärkungsvariante:
- Endurance Carbide
- Description:
- Topmix
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Length (mm):
- 424
- Width (mm):
- 40
- Working width (mm):
- 40
- Types:
- Trio, Quadro, Vector
- No. of holes:
- 2
- Hole spacing (mm):
- 115
- Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Length (mm):
- 260
- Width (mm):
- 100
- Working width (mm):
- 100
- Thickness (mm):
- 8
- Types:
- Vario
- No. of holes:
- 3
- Description:
- Coated
A wear-reducing top layer is applied to the workpiece. A filler metal (wire) is welded on for this purpose - Verstärkungsvariante:
- Endurance Carbide
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Length (mm):
- 224,3
- Width (mm):
- 228
- Working width (mm):
- 228
- Suitable bolts:
- 1801060810 + 1805000019, for Saphir 1871070810
- Types:
- Allrounder
- Dimensions (mm):
- 228 x 224.3
- No. of holes:
- 2
- Hole spacing (mm):
- 45
- Hole Ø (mm):
- 10,5
- Version:
- • Large hard metal plates on the upper side guarantee maximum wear protection
• Hard metal plate on the underside is embedded in a triangular shape in the base body - breakages are almost impossible
• Complex hardening process: hardening after the soldering process maintains full hardness in the base body
• Hardness in the base body: 46 HRc throughout (other aftermarket products: 36 HRc)
• Sophisticated soldering process - mixing of soldering material is crucial
• Low-wear design
• Top performance at a great price
• Easy insertion into the soil and lower fuel consumption thanks to consistently sharp tools
• Significantly longer service life compared to standard tools (a factor of 7-10 depending on the soil)
• No readjustment of tool depth due to wear
• Time and cost savings due to fewer share changes
• Made in Germany - Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Menke no.:
- 273031
- Verstärkungsvariante:
- Endurance Carbide
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
OEM numbers are provided for reference purposes only. GRANIT replacement parts are not intended to be sold as OEM parts. Wilhelm Fricke SE is the manufacturer of all own brand items. All prices are in $, excl. VAT. Errors reserved. Delivery subject to availability.