Horsch
- Width (mm):
- 260
- Types:
- Terrano, Tiger with MulchMix system
- Thickness (mm):
- 10
- Dimensions (mm):
- 260 x 10
- No. of holes:
- 4
- Working width (mm):
- 172,5
- To fit:
- Horsch
- Version:
- • Large hard metal plates on the upper side guarantee maximum wear protection
• Complex hardening process: hardening after the soldering process maintains full hardness in the base body
• Hardness in the base body: 46 HRc throughout (other aftermarket products: 36 HRc)
• Sophisticated soldering process - mixture of soldering material is crucial
• Low-wear design
• Top performance at a great price
• Significantly longer service life compared to standard tools (a factor of 7-10 depending on the soil)
• Time and cost savings thanks to fewer share changes
• Made in Germany - Menke no.:
- 212944
- Verstärkungsvariante:
- Endurance Carbide
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Width (mm):
- 260
- Types:
- Terrano, Tiger with MulchMix system
- Thickness (mm):
- 10
- Dimensions (mm):
- 260 x 10
- No. of holes:
- 4
- Working width (mm):
- 224
- To fit:
- Horsch
- Version:
- • Large hard metal plates on the upper side guarantee maximum wear protection
• Complex hardening process: hardening after the soldering process maintains full hardness in the base body
• Hardness in the base body: 46 HRc throughout (other aftermarket products: 36 HRc)
• Sophisticated soldering process - mixture of soldering material is crucial
• Low-wear design
• Top performance at a great price
• Significantly longer service life compared to standard tools (a factor of 7-10 depending on the soil)
• Time and cost savings thanks to fewer share changes
• Made in Germany - Menke no.:
- 212943
- Verstärkungsvariante:
- Endurance Carbide
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Length (mm):
- 256
- Width (mm):
- 100
- Types:
- Terrano, Tiger mit MulchMix System
- Thickness (mm):
- 10
- Working width (mm):
- 256
- Version:
- • Large hard metal plates on the upper side guarantee maximum wear protection
• Hard metal plate on the underside is embedded in a triangular shape in the base body - breakages are almost impossible
• Complex hardening process: hardening after the soldering process maintains full hardness in the base body.
• Hardness in the base body: 46 HRc throughout (other aftermarket products: 36 HRc)
• Sophisticated soldering process - mixing of soldering material is crucial
• Low-wear design
• Top performance at a great price
• Easy insertion into the soil and lower fuel consumption thanks to consistently sharp tools
• Significantly longer service life compared to standard tools (a factor of 7-10 depending on the soil)
• No readjustment of tool depth due to wear
• Time and cost savings due to fewer share changes
• Made in Germany - Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Width (mm):
- 120
- Types:
- Terrano, Tiger with MulchMix system
- Thickness (mm):
- 10
- Dimensions (mm):
- 182 x 10
- No. of holes:
- 4
- Working width (mm):
- 182
- Version:
- • Large hard metal plates on the upper side guarantee maximum wear protection
• Complex hardening process: hardening after the soldering process maintains full hardness in the base body
• Hardness in the base body: 46 HRc throughout (other aftermarket products: 36 HRc)
• Sophisticated soldering process - mixture of soldering material is crucial
• Low-wear design
• Top performance at a great price
• Significantly longer service life compared to standard tools (a factor of 7-10 depending on the soil)
• Time and cost savings thanks to fewer share changes
• Made in Germany - Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Verstärkungsvariante:
- Endurance Carbide
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Types:
- Terrano, Tiger mit MulchMix System
- Thickness (mm):
- 10
- Dimensions (mm):
- 256 x 10
- No. of holes:
- 4
- Version:
- • Large hard metal plates on the upper side guarantee maximum wear protection
• Complex hardening process: hardening after the soldering process maintains full hardness in the base body.
• Hardness in the base body: 46 HRc throughout (other aftermarket products: 36 HRc)
• Sophisticated soldering process - mixture of soldering material is crucial
• Low-wear design
• Top performance at a great price
• Significantly longer service life compared to standard tools (a factor of 7-10 depending on the soil)
• Time and cost savings thanks to fewer share changes
• Made in Germany - Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Width (mm):
- 120
- Types:
- Terrano, Tiger with MulchMix system
- Thickness (mm):
- 10
- Dimensions (mm):
- 182 x 10
- No. of holes:
- 4
- Working width (mm):
- 182
- Version:
- • Large hard metal plates on the upper side guarantee maximum wear protection
• Complex hardening process: hardening after the soldering process maintains full hardness in the base body
• Hardness in the base body: 46 HRc throughout (other aftermarket products: 36 HRc)
• Sophisticated soldering process - mixture of soldering material is crucial
• Low-wear design
• Top performance at a great price
• Significantly longer service life compared to standard tools (a factor of 7-10 depending on the soil)
• Time and cost savings thanks to fewer share changes
• Made in Germany - Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Verstärkungsvariante:
- Endurance Carbide
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Length (mm):
- 276,7
- Width (mm):
- 50-80
- Hole spacing (mm):
- 57
- Suitable bolts:
- M12 DIN 608
- Colour:
- Black
- Dimensions (mm):
- 276.7 x 50-80
- No. of holes:
- 2
- Working width (mm):
- 50-80
- To fit:
- Horsch
- Version:
- • Large hard metal plates on the upper side guarantee maximum wear protection
• Hard metal plate on the underside is embedded in a triangular shape in the base body— breakages are almost impossible
• Complex hardening process: hardening after the soldering process maintains full hardness in the base body
• Hardness in the base body: 46 HRc throughout (other aftermarket products: 36 HRc)
• Sophisticated soldering process — mixing of soldering material is crucial
• Low-wear design
• Excellent price/performance ratio
• Easy insertion into the soil and lower fuel consumption thanks to consistently sharp tools
• Significantly increased durability compared to standard tools (factor 7-10 depending on the soil)
• No readjustment of tool depth due to wear
• Time and cost savings due to fewer share changes
• MADE IN GERMANY - Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Verstärkungsvariante:
- Endurance Carbide
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
Special item: cannot be returned or cancelled. Additional shipping costs may be incurred. Delivery time subject to availability from the supplier.
- Length (mm):
- 217
- Width (mm):
- 215
- Hole spacing (mm):
- 45
- Types:
- Cruiser
- Suitable bolts:
- 70600311506 + 18450855
- No. of holes:
- 2
- Working width (mm):
- 215
- Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Verstärkungsvariante:
- Endurance Carbide
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Length (mm):
- 276,7
- Width (mm):
- 50-80
- Hole spacing (mm):
- 57
- Suitable bolts:
- DIN 608-M12
- Colour:
- Black
- Dimensions (mm):
- 276.7 x 50-80
- No. of holes:
- 2
- Working width (mm):
- 50-80
- To fit:
- Horsch
- Version:
- • Large hard metal plates on the upper side guarantee maximum wear protection
• Hard metal plate on the underside is embedded in a triangular shape in the base body - breakages are almost impossible
• Complex hardening process: hardening after the soldering process maintains full hardness in the base body.
• Hardness in the base body: 46 HRc throughout (other aftermarket products: 36 HRc)
• Sophisticated soldering process - mixing of soldering material is crucial
• Low-wear design
• Top performance at a great price
• Easy insertion into the soil and lower fuel consumption thanks to consistently sharp tools
• Significantly longer service life compared to standard tools (a factor of 7-10 depending on the soil)
• No readjustment of tool depth due to wear
• Time and cost savings due to fewer share changes
• Made in Germany - Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Menke no.:
- 228438
- Verstärkungsvariante:
- Endurance Carbide
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Length (mm):
- 480
- Width (mm):
- 40
- Hole spacing (mm):
- 57
- Types:
- Terrano, Tiger with MulchMix system
- Thickness (mm):
- 25
- Colour:
- Black
- Dimensions (mm):
- 480 x 40 x 25
- Working width (mm):
- 40
- Version:
- • Large hard metal plates on the upper side guarantee maximum wear protection
• Hard metal plate on the underside is embedded in a triangular shape in the base body - breakages are almost impossible
• Complex hardening process: hardening after the soldering process maintains full hardness in the base body
• Hardness in the base body: 46 HRc throughout (other aftermarket products: 36 HRc)
• Sophisticated soldering process - mixing of soldering material is crucial
• Low-wear design
• Top performance at a great price
• Easy insertion into the soil and lower fuel consumption thanks to consistently sharp tools
• Significantly longer service life compared to standard tools (a factor of 7-10 depending on the soil)
• No readjustment of tool depth due to wear
• Time and cost savings due to fewer share changes
• Made in Germany - Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Verstärkungsvariante:
- Endurance Carbide
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Length (mm):
- 300
- Width (mm):
- 80
- Types:
- Cruiser
- Suitable bolts:
- 70600311506, 18450855
- suitable for:
- Horsch
- Colour:
- Black
- Dimensions (mm):
- 300 x 80
- No. of holes:
- 2
- Working width (mm):
- 80
- To fit:
- Baselier
- Version:
- • Large hard metal plates on the upper side guarantee maximum wear protection
• Hard metal plate on the underside is embedded in a triangular shape in the base body - breakages are almost impossible
• Complex hardening process: hardening after the soldering process maintains full hardness in the base body
• Hardness in the base body: 46 HRc throughout (other aftermarket products: 36 HRc)
• Sophisticated soldering process - mixing of soldering material is crucial
• Low-wear design
• Top performance at a great price
• Easy insertion into the soil and lower fuel consumption thanks to consistently sharp tools
• Significantly longer service life compared to standard tools (a factor of 7-10 depending on the soil)
• No readjustment of tool depth due to wear
• Time and cost savings due to fewer share changes
• Made in Germany - Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Verstärkungsvariante:
- Endurance Carbide
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Length (mm):
- 298
- Width (mm):
- 50
- Hole spacing (mm):
- 45
- Types:
- Cruiser
- Suitable bolts:
- 1801260812
- Version:
- • Large hard metal plates on the upper side guarantee maximum wear protection
• Hard metal plate on the underside is embedded in a triangular shape in the base body - breakages are almost impossible
• Complex hardening process: hardening after the soldering process maintains full hardness in the base body
• Hardness in the base body: 46 HRc throughout (other aftermarket products: 36 HRc)
• Sophisticated soldering process - mixing of soldering material is crucial
• Low-wear design
• Top performance at a great price
• Easy insertion into the soil and lower fuel consumption thanks to consistently sharp tools
• Significantly longer service life compared to standard tools (a factor of 7-10 depending on the soil)
• No readjustment of tool depth due to wear
• Time and cost savings due to fewer share changes
• Made in Germany - Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Verstärkungsvariante:
- Endurance Carbide
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
OEM numbers are provided for reference purposes only. GRANIT replacement parts are not intended to be sold as OEM parts. Wilhelm Fricke SE is the manufacturer of all own brand items. All prices are in $, excl. VAT. Errors reserved. Delivery subject to availability.