Polyhose SAE 100 R1 DN06 double
Part no.: 87001259
Further information
- Nominal width:
- DN 6 - 1/4"
- Outer Ø (mm):
- 11,7
- Operating pressure max. (bar):
- 275
- Burst pressure (bar):
- 1100
- Bending radius (mm):
- 40
- Press fitting (non-skive):
- 87002060
- Weight:
- 354 g
When used as intended, rubber, thermoplastic and PTFE hoses are generally suitable for use with organic oils according to VDMA 24568 or ISO 15380, oils based on synthetic esters (HEES), on rapeseed oil (HETG) and on polyglycol (HEPG). However, additives and various operating conditions can limit this stability.
The operator is also responsible for periodical oil management to ensure proper operation of the hydraulics. If quality assurance maintenance is not carried out, wear or even failure can occur, for example due to cavitation or abrasion in the hose connection.
The operator is also responsible for periodical oil management to ensure proper operation of the hydraulics. If quality assurance maintenance is not carried out, wear or even failure can occur, for example due to cavitation or abrasion in the hose connection.
Application
Medium-pressure hydraulic lines 100 to 300 bar. Hydraulic applications where resistance to abrasion and mineral oil are required, use for synthetic fluids or water-based fluids in hydraulic systems for agricultural machinery, machinery for earthworks, articulated and telescopic booms, and other lifting and handling equipment.
Construction
Interior: thermoplastic elastomer Insert:
steel wire braid Cover:
black polyurethane Temperature:
-40°C to +100°C (only up to +70°C for air and water-based fluids)
Medium-pressure hydraulic lines 100 to 300 bar. Hydraulic applications where resistance to abrasion and mineral oil are required, use for synthetic fluids or water-based fluids in hydraulic systems for agricultural machinery, machinery for earthworks, articulated and telescopic booms, and other lifting and handling equipment.
Construction
Interior: thermoplastic elastomer Insert:
steel wire braid Cover:
black polyurethane Temperature:
-40°C to +100°C (only up to +70°C for air and water-based fluids)