GRANIT Additional control unit

Further information

Technical data:

Max. operating pressure: 250 bar
Nominal flow: min. 120 l/min.
Operating material: hydraulic oil
Tightening torque: 30 Nm
Connections: M22 x 1.5
Dimensions: 250 x 150 x 40 mm

Description:

This auxiliary control unit is a 5/4-way valve which is manually operated to control cylinders and hydraulic motors. It is equipped with a load sensing valve. The auxiliary control unit is a four-position control unit that can be used for double-acting hydraulic cylinders. It has O-ring-sealed consumer connections A and B. This means that no leakage occurs at high loads. The device has a detent position in the lifting position which is equipped with an automatic hydraulic limit switch. When switching via the lowering position, the latched float position is engaged. This is not unlocked hydraulically (consumer connections A and B are connected together to the return line). The float position can be used as latched lowering position. It is important to pay attention to the lowering speed. The auxiliary control valve is available with single lever or with cable remote control. A back pressure valve is provided to prevent a pressure drop against the flow direction. The valve can be mounted on the left or right side using a freely positionable sealing plate. The sealing plate is included.
Load sensing valve

Dimensions:

250 x 150 x 40 mm

Connection thread:

M22 x 1,5

Operating pressure max. (bar):

250

Fixing bolt tightening torque Nm:

30

Nominal flow rate (l/min.):

120

Operating temperature (°C):

-20…+80

Viscosity:

10...200 mm2/s

Manufacturer:

Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]

Weight:

5,38 kg

EAN codes:

4059139217298

Catalogue:

Hydraulics & pneumatics (p. 1129)

To be found in category:

Hydraulics & pneumaticsHydraulics for tractorsControl unitsDeutzBosch System SB23LS