Hardi Injector nozzle
ISO MD Duo 03
Part no.: 61537218100
Further information
- Colour:
- Blue
- Tip material:
- Plastic
- Recommended filter (no. of meshes):
- 80
- Spraying angle:
- 110°
- Housing material:
- Plastic
- Wrench size:
- 8
- Nozzle type:
- Injector nozzle
- Weight:
- 2 g
- Catalogue:
- Plant spraying (p. 1095)
- To be found in category:
- Plant sprayingNozzles and accessoriesHARDI nozzlesNozzle Minidrift Duo ISO 110SW 8
The HARDI MINIDRIFT Duo nozzle should be selected if the spraying conditions are not ideal due to wind and the spraying work cannot be postponed. Maximum drift reduction is achieved at low spraying pressure. The MINIDRIFT Duo nozzles are recorded as drift reducing in the JKI loss reducing technology list.
• Working pressure: 1.5 to 6 bar
• ISO: Flow, colour and external dimensions
• 30° forward and backward angle
• Water application rates from 125 to 420 l/ha (at 8 km/h)
• SYNTAL – precision-injected thermoplastic
The compact air injector nozzles produce a medium to very coarse droplet spectrum. This means that reliable drift prevention is possible without the risk of poor coverage or deposition on leaves. The two angled spray patterns increase the number of droplets reaching the target surface compared with standard injector nozzles. This results in better coverage in dense crops and on vertical target areas.
• Working pressure: 1.5 to 6 bar
• ISO: Flow, colour and external dimensions
• 30° forward and backward angle
• Water application rates from 125 to 420 l/ha (at 8 km/h)
• SYNTAL – precision-injected thermoplastic
The compact air injector nozzles produce a medium to very coarse droplet spectrum. This means that reliable drift prevention is possible without the risk of poor coverage or deposition on leaves. The two angled spray patterns increase the number of droplets reaching the target surface compared with standard injector nozzles. This results in better coverage in dense crops and on vertical target areas.