Hardi Mini Drift ISO ISO-MD-110-025
ISO-MD-110-025
Part no.: 615372123
Further information
- Colour:
- Purple
- Tip material:
- Plastic
- Recommended filter (no. of meshes):
- 80
- Spraying angle:
- 110°
- Housing material:
- Plastic
- Nozzle type:
- Injector flat-fan nozzle
- Weight:
- 10 g
- Catalogue:
- Plant spraying (p. 1094)
The HARDI MINIDRIFT nozzle should be selected if the spraying conditions are not ideal due to wind and the spraying work cannot be postponed. Maximum drift reduction is achieved at low spraying pressure.
● Air injector nozzle
● ISO: Flow, colour and external dimensions
● Working pressure: 1 to 5 bar
● Application rates from 60 to 400 l/ha (at 8 km/h)
● SYNTAL - thermoplastic injected with precision
These nozzles have excellent and homogeneous transverse distribution with boom heights of 40 to 90 cm.
The droplet spectrum is coarse (G) to very coarse (SG), providing good drift control without reducing coverage and deposition on the leaves to an unwanted extent. The venturi insert can be easily removed to clean the nozzle.
Two large air openings reduce the risk of clogging. The short design prevents damage.
Complies with ISO standards.
● ISO: Flow, colour and external dimensions
● Working pressure: 1 to 5 bar
● Application rates from 60 to 400 l/ha (at 8 km/h)
● SYNTAL - thermoplastic injected with precision
These nozzles have excellent and homogeneous transverse distribution with boom heights of 40 to 90 cm.
The droplet spectrum is coarse (G) to very coarse (SG), providing good drift control without reducing coverage and deposition on the leaves to an unwanted extent. The venturi insert can be easily removed to clean the nozzle.
Two large air openings reduce the risk of clogging. The short design prevents damage.
Complies with ISO standards.