GOLLMER & HUMMEL Hose
Hilcoflex PU
Part no.: 40504053750
Further information
- Inner Ø (mm):
- 65
- Inner Ø (inches):
- 2 1/2"
- Working pressure (bar):
- 16
- Burst pressure (bar):
- 50
- Length (m):
- Meterware
- Operating pressure max. (bar):
- 20
- Wall thickness (mm):
- 2,6
- Temperature range (°C):
- -50 °C - +75 °C
- Version:
- Tensile strength 6300 kg
- Hose type:
- Flat hose
- Food safe:
- No
- Roll length (m):
- 100
- Weight (kg/m):
- 0.63
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
- Weight:
- 600 g
- To be found in category:
- Fertiliser spreading, slurry & biogas technologyPipes and hosesHosesFlat hosesHilcoflex PU
The Hilcoflex PU is a multipurpose hose made of polyurethane.
Application:
• Construction, industry, waste disposal
• Agriculture and mining
• Conveying of abrasive media
• Irrigation and slurry hose systems
• For heavy-duty use
Advantages:
• Outstanding abrasion resistance
• Very robust, wear-resistant and durable
• Resistant to oil, petrol and chemicals (see resistance list)
• Resistant to ageing and ozone
• Light and flexible in comparison with mandrel-wound industrial hoses
• Very good flexibility at low temperatures
Properties:
Fabric inlay:
• High-tensile polyester yarn, circular woven
• Special design for high continuous operating pressures, high tensile strength and low elongation under pressure
• Completely embedded in polyurethane, therefore optimum protection against mechanical damage
Inner and outer layer:
• Thermoplastic polyether polyurethane, pressed through the textile inlay in a special single-stage extrusion process
• Highly abrasion-resistant with a 4-5 times longer service life than nitrile hoses
• Interior: very smooth for minimal pressure loss
• Exterior: very smooth for good flexibility
Operating pressure:
Specifications only apply to the hose (medium: water, 20 °C). For hoses with couplings, the operating pressure may be lower than indicated above due to the rated pressure of the couplings or the type of installation. With compressed air, the maximum operating pressure is 25% of the burst pressure.
Tensile strength: The maximum tensile load during continuous operation should not exceed 1/3 of the tensile strength.
Temperature range: -50 °C to +75 °C (water)
Sold by the metre!
Application:
• Construction, industry, waste disposal
• Agriculture and mining
• Conveying of abrasive media
• Irrigation and slurry hose systems
• For heavy-duty use
Advantages:
• Outstanding abrasion resistance
• Very robust, wear-resistant and durable
• Resistant to oil, petrol and chemicals (see resistance list)
• Resistant to ageing and ozone
• Light and flexible in comparison with mandrel-wound industrial hoses
• Very good flexibility at low temperatures
Properties:
Fabric inlay:
• High-tensile polyester yarn, circular woven
• Special design for high continuous operating pressures, high tensile strength and low elongation under pressure
• Completely embedded in polyurethane, therefore optimum protection against mechanical damage
Inner and outer layer:
• Thermoplastic polyether polyurethane, pressed through the textile inlay in a special single-stage extrusion process
• Highly abrasion-resistant with a 4-5 times longer service life than nitrile hoses
• Interior: very smooth for minimal pressure loss
• Exterior: very smooth for good flexibility
Operating pressure:
Specifications only apply to the hose (medium: water, 20 °C). For hoses with couplings, the operating pressure may be lower than indicated above due to the rated pressure of the couplings or the type of installation. With compressed air, the maximum operating pressure is 25% of the burst pressure.
Tensile strength: The maximum tensile load during continuous operation should not exceed 1/3 of the tensile strength.
Temperature range: -50 °C to +75 °C (water)
Sold by the metre!