Tangit Adhesive
Part no.: 4050146020
Further information
- Version:
- Type Tangit
- Container:
- 125 g tube
- Weight:
- 156 g
- Fig. no.:
- 1
- EAN codes:
- 4019305346030
- Catalogue:
- Irrigation & sprinkling (p. 531)
- To be found in category:
- Irrigation & sprinklingIrrigation technologyFittings (plastic)Cleaner and adhesivePipe adhesive
Tips for gluing: PVC greenhouse pipes, PVC pipes for water installations, PVC sewer pipes
Only glue PVC pipes when they are completely dry. Water, condensates and humidity prevent a good connection.
Do not glue at temperatures below 5 °C. The drying time for our adhesive is approx. 24 hours, only then should pressure be applied to the connections.
- Clean the ends and sleeves with methylene chloride cleaner
- Apply the adhesive evenly to both parts
- Use a flat brush
- Be sure to spread the adhesive along the length of the pipes from the inside to the outside
- Insert the pipe ends and sleeves into each other immediately after applying the adhesive
- Remove excess adhesive immediately
- Clean the brush with DCM solvent
Shelf life: approx. 12 months, storage: frost-free
Do not glue at temperatures below 5 °C. The drying time for our adhesive is approx. 24 hours, only then should pressure be applied to the connections.
- Clean the ends and sleeves with methylene chloride cleaner
- Apply the adhesive evenly to both parts
- Use a flat brush
- Be sure to spread the adhesive along the length of the pipes from the inside to the outside
- Insert the pipe ends and sleeves into each other immediately after applying the adhesive
- Remove excess adhesive immediately
- Clean the brush with DCM solvent
Shelf life: approx. 12 months, storage: frost-free
Danger
Highly flammable liquid and vapour
Causes serious eye damage.
May cause drowsiness or dizziness.
Keep out of reach of children.
Keep away from heat/sparks/open flames/hot surfaces. — No smoking.
Use only outdoors or in a well-ventilated area.