SUNFAB Dual-circuit pump SLPD
Part no.: 257SLPD35/35
Further information
- Type:
- 35/35
- Theoretical oil flow (l/min) at pump rpm (500/1000/1500):
- 16.9 +16.9 / 33.9 +33.9 / 50.8 +50.8
- Displacement (cc/rev):
- 33,9 + 33,9
- Operating pressure max. (bar):
- 330
- Tipping torque (Nm):
- 26,5
- Drive shaft:
- 8x32x36
- Direction of rotation:
- links / rechts
- Pump type:
- SLPD
- Max. speed (1/min.):
- 2200
- Inlet connection:
- Aufnahme für Saugstutzen
- Outlet connection:
- G 3/4" (BSP)
- Version:
- Zweikreispumpe
- Adaptor plate hole pattern (mm):
- 80x80 (4-Loch)
- Fitting Ø (mm):
- 80
- Type:
- Konstantpumpe
- Additional information:
- Drehrichtungsunabhängig
- Max. pump speed (rpm):
- 2200
- Volume flow max. (l/min):
- 74 + 74
- Weight:
- 22,00 kg
- Catalogue:
- Hydraulics & pneumatics (p. 944)
• Unaffected by rotation direction
• A cost-effective, comprehensive solution in comparison with the conventional installation of two pumps in a transfer case
• Smooth operation over the entire speed range
• Long life due to selection and design of bearings, seals, etc.
• O-rings on all contact surfaces as well as a double shaft seal reliably prevent leaks from the pump and power take-off
• Mounting kit and flange gasket included in delivery.
SLPD 20/20-64/32 DIN is a series of in-line dual-circuit pumps with extremely low noise levels for demanding mobile hydraulic applications. Maximum operating pressure 330-350 bar, depending on the version. SLPD 20/20-64/32 DIN allows direct mounting on the power take-off in very tight spaces thanks to its slim pump housing. It is also suitable for installation with frame mounting via an intermediate shaft.
• A cost-effective, comprehensive solution in comparison with the conventional installation of two pumps in a transfer case
• Smooth operation over the entire speed range
• Long life due to selection and design of bearings, seals, etc.
• O-rings on all contact surfaces as well as a double shaft seal reliably prevent leaks from the pump and power take-off
• Mounting kit and flange gasket included in delivery.
SLPD 20/20-64/32 DIN is a series of in-line dual-circuit pumps with extremely low noise levels for demanding mobile hydraulic applications. Maximum operating pressure 330-350 bar, depending on the version. SLPD 20/20-64/32 DIN allows direct mounting on the power take-off in very tight spaces thanks to its slim pump housing. It is also suitable for installation with frame mounting via an intermediate shaft.
Special item: cannot be returned or cancelled. Additional shipping costs may be incurred. Delivery time subject to availability from the supplier.