Hydro-Leduc Single-circuit axial piston pump PAC 80cc
Part no.: 25702729
Further information
- Displacement (cc/rev):
- 78
- Volume flow max. (l/min):
- 105
- Max. speed (1/min.):
- 1350
- Operating pressure max. (bar):
- 400
- Torque (Nm):
- 540
- Tipping torque (Nm):
- 21.3
- Inlet connection:
- G 1.1/2" (BSP)
- Outlet connection:
- G 3/4" (BSP)
- A (mm):
- 247
- B (mm):
- 102,5
- C (mm):
- 116,3
- D (mm):
- 63
- E (mm):
- 78
- F (mm):
- 65
- G (mm):
- 107
- Drive shaft:
- 8x32x36
- Direction of rotation:
- links / rechts
- Pump type:
- PAC
- Version:
- Einkreispumpe
- Adaptor plate hole pattern (mm):
- 80x80 (4-Loch)
- Fitting Ø (mm):
- 80
- Type:
- Konstantpumpe
- Additional information:
- Drehrichtungswechsel ohne Montageeingriff
- Weight:
- 7 g
- Catalogue:
- Hydraulics & pneumatics (p. 931)
The unique design principle of the PA and PAC pumps provides a robust solution for a long service life and maximum pressure requirements in truck hydraulics. These pumps are extremely resistant to contamination in the oil and are therefore optimally adapted to the harsh operating conditions.
The (patented) design principle of this pump series allows the direction of rotation to be implemented both clockwise and anticlockwise without any further assembly work being required.
As with all LEDUC truck pumps, the latest innovations in hydraulic seals were given special emphasis for this series
Double shaft sealing: Seal to the outside, resistant to the high temperatures in the truck gearbox. Seal inward, adapted to the requirements of the hydraulic circuit.
A transparent hose, which is inserted into the relief hole between the shaft seals, effectively prevents the penetration of dirt or high-pressure water etc. and thus prevents damage to the seals.
Mounting flange in accordance with DIN / ISO, suitable for auxiliary drives on trucks, centering Ø 80 mm, hole spacing 80 mm.
Shaft in accordance with DIN / ISO, 8 x 32 x 36
The (patented) design principle of this pump series allows the direction of rotation to be implemented both clockwise and anticlockwise without any further assembly work being required.
As with all LEDUC truck pumps, the latest innovations in hydraulic seals were given special emphasis for this series
Double shaft sealing: Seal to the outside, resistant to the high temperatures in the truck gearbox. Seal inward, adapted to the requirements of the hydraulic circuit.
A transparent hose, which is inserted into the relief hole between the shaft seals, effectively prevents the penetration of dirt or high-pressure water etc. and thus prevents damage to the seals.
Mounting flange in accordance with DIN / ISO, suitable for auxiliary drives on trucks, centering Ø 80 mm, hole spacing 80 mm.
Shaft in accordance with DIN / ISO, 8 x 32 x 36
Special item: cannot be returned or cancelled. Additional shipping costs may be incurred. Delivery time subject to availability from the supplier.