Casappa Pump APL 82B0 43T0
Part no.: 2570251
Further information
- A (mm):
- 191,5
- B (mm):
- 122,5
- D (mm):
- G1"
- Direction of rotation:
- Clockwise/anticlockwise
- E (mm):
- G1"
- N max. (T/min):
- 1500
- N min. (T/min):
- 350
- Capacity Q (cc/rev):
- 81,29
- Operating pressure max. (bar):
- 160
- Pressure max. (bar):
- 180
- Peak (bar):
- 220
- Drive shaft:
- Cylindrical shaft 22 mm
- Line connection suction side:
- 1" thread
- Line connection pressure side:
- 1" thread
- Adaptor plate hole pattern (mm):
- 73 (3 x)
- Fitting Ø (mm):
- 52
- Weight:
- 12,43 kg
- To be found in category:
- Hydraulics & pneumaticsPumps, gears and accessoriesCASAPPA gear pumpsSeries APL-B
The APL series pumps are suitable for low and medium drive speeds, but due to the design, a large delivery volume and high efficiency are achieved in the entire speed range at low size. The drive shaft cannot absorb axial and radial forces. When used with a V-belt pulley, etc., the pump must be combined with an outboard bearing. The maximum torque of the drive shaft is 160 Nm.
The APL pumps are equipped with 2 directions of rotation as standard.
Flange: Italian standard, centering-diameter 52 mm
shaft cylindrical shaft Ø 22 mm
Material: Cast iron type of the liquid: mineral-based hydraulic oil
Liquid temperature: -15°C max 80°C
recommended viscosity 20 mm² 2 /s - 100 mm² 2 /s
filter grade: 10 - 25 micron
Suction side: G 1 - > 82cc G 1.1/4
pressure side: G 1 - > 82cc G 1 .1/4
The APL pumps are equipped with 2 directions of rotation as standard.
Flange: Italian standard, centering-diameter 52 mm
shaft cylindrical shaft Ø 22 mm
Material: Cast iron type of the liquid: mineral-based hydraulic oil
Liquid temperature: -15°C max 80°C
recommended viscosity 20 mm² 2 /s - 100 mm² 2 /s
filter grade: 10 - 25 micron
Suction side: G 1 - > 82cc G 1.1/4
pressure side: G 1 - > 82cc G 1 .1/4
Special item: cannot be returned or cancelled. Additional shipping costs may be incurred. Delivery time subject to availability from the supplier.