Body BS42
- To fit:
- Lemken
- Suitable bolts:
- 2x 1801235810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Menke no.:
- 54525
- Designation:
- B2SR
- Picture no.:
- 10
- suitable for plough body:
- B20, B25, B25H, B30, B35, B40, BS20, BS40, BS42, D50, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Length (mm):
- 341
- Bolts with nuts included:
- 2 x 1801235810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 10
- suitable for plough body:
- B20, B25, B25H, B30, B35, B40, BS20, BS40, BS42, D50, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- To fit:
- Lemken
- Suitable bolts:
- 2x 1801235810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Menke no.:
- 30916
- Designation:
- B2SL
- Picture no.:
- 10
- suitable for plough body:
- B20, B25, B25H, B30, B35, B40, BS20, BS40, BS42, D50, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 2 x 1801235810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 10
- suitable for plough body:
- B20, B25, B25H, B30, B35, B40, BS20, BS40, BS42, D50, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Material:
- The coating consists of a hard metal powder that is mixed into a paste. This can be sprayed on or applied by immersion. Since, in principle, any shape can be coated, this is particularly suitable for complex designs, as well as for acidic conditions and applications where a smooth surface is required. The powder is applied under a protective atmosphere and permanently bonds with the base metal. This process increases durability and helps prevent breakage. With this coating, tungsten carbide particles are added to the standard powder to achieve a service life that is 5 times longer.
- Suitable bolts:
- 2x 1801235810
- Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Menke no.:
- 124183
- Picture no.:
- 10
- suitable for plough body:
- B20, B25, B25H, B30, B35, B40, BS20, BS40, BS42, D50, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Material:
- The coating consists of a hard metal powder that is mixed into a paste. This can be sprayed on or applied by immersion. Since, in principle, any shape can be coated, this is particularly suitable for complex designs, as well as for acidic conditions and applications where a smooth surface is required. The powder is applied under a protective atmosphere and permanently bonds with the base metal. This process increases durability and helps prevent breakage. With this coating, tungsten carbide particles are added to the standard powder to achieve a service life that is 5 times longer.
- Suitable bolts:
- 2x 1801235810
- Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Menke no.:
- 260676
- Picture no.:
- 10
- suitable for plough body:
- B20, B25, B25H, B30, B35, B40, BS20, BS40, BS42, D50, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- To fit:
- Lemken
- Suitable bolts:
- 2x 1801240812
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Designation:
- B2SPR
- Picture no.:
- 10
- suitable for plough body:
- B20, B25, B25H, B30, B35, B40, BS20, BS40, BS42, D50, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
Special item: cannot be returned or cancelled. Additional shipping costs may be incurred. Delivery time subject to availability from the supplier.
- To fit:
- Lemken
- Suitable bolts:
- 2x 1801240812
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Designation:
- B2SPR
- Picture no.:
- 10
- suitable for plough body:
- B20, B25, B25H, B30, B35, B40, BS20, BS40, BS42, D50, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
Special item: cannot be returned or cancelled. Additional shipping costs may be incurred. Delivery time subject to availability from the supplier.
- Suitable bolts:
- 1x 1801235810 + 1x 1801250810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Menke no.:
- 44876
- Designation:
- S2WR
- Picture no.:
- 12
- suitable for plough body:
- B20, B25, B25H, B30, B35, B40, BS20, BS40, BS42, BU10B, BU1B, BU2B, BU3B, C30, C32, C40, D50, NBU1B, NBU2B, NBU3B, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 1 x 1801235810 + 1 x 1801250810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 12
- suitable for plough body:
- B20, B25, B25H, B30, B35, B40, BS20, BS40, BS42, BU10B, BU1B, BU2B, BU3B, C30, C32, C40, D50, NBU1B, NBU2B, NBU3B, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 1x 1801235810 + 1x 1801250810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Menke no.:
- 260079
- Designation:
- S2WL
- Picture no.:
- 12
- suitable for plough body:
- B20, B25, B25H, B30, B35, B40, BS20, BS40, BS42, BU10B, BU1B, BU2B, BU3B, C30, C32, C40, D50, NBU1B, NBU2B, NBU3B, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 1 x 1801235810 + 1 x 1801250810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 12
- suitable for plough body:
- B20, B25, B25H, B30, B35, B40, BS20, BS40, BS42, BU10B, BU1B, BU2B, BU3B, C30, C32, C40, D50, NBU1B, NBU2B, NBU3B, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 3x 1801235810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Menke no.:
- 224055
- Designation:
- SB56PR
- Picture no.:
- 7
- suitable for plough body:
- BS20, BS40, BS42, CS40, US35, US40, DuraMaxx Schnellwechselsystem Körper DMCS40, DMCS50, DMSCS40, DMSCS50, DMW40, DMW52
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 3x 1801235810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Menke no.:
- 110250
- Designation:
- SB56PL
- Picture no.:
- 7
- suitable for plough body:
- BS20, BS40, BS42, CS40, US35, US40, DuraMaxx Schnellwechselsystem Körper DMCS40, DMCS50, DMSCS40, DMSCS50, DMW40, DMW52 <br>
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- To fit:
- Lemken
- Suitable bolts:
- 3x 1801240812
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Verstärkungsvariante:
- Hartmetall
- Designation:
- SB56R
- Picture no.:
- 7
- suitable for plough body:
- BS20, BS40, BS42, CS40, M50, M55, P50, P55, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- To fit:
- Lemken
- Suitable bolts:
- 3x 1801240812
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Verstärkungsvariante:
- Hartmetall
- Designation:
- SB56L
- Picture no.:
- 7
- suitable for plough body:
- BS20, BS40, BS42, CS40, M50, M55, P50, P55, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Thickness (mm):
- 12
- Total length (mm):
- 501
- Hole spacing (mm):
- 136
- Suitable bolts:
- 3x 1801235810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Menke no.:
- 110999
- Designation:
- SB56DR
- Picture no.:
- 7
- suitable for plough body:
- B20, B30, B40, BS20, BS40, BS42, CS40, M50, M55, P50, P55, US35, US40, DuraMaxx Schnellwechselsystem Körper DMCS40, DMCS50, DMSCS40, DMSCS50, DMW40, DMW52
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Thickness (mm):
- 12
- Bolts with nuts included:
- 3 x 1801235810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 7
- suitable for plough body:
- B20, B30, B40, BS20, BS40, BS42, CS40, M50, M55, P50, P55, US35, US40, DuraMaxx Schnellwechselsystem Körper DMCS40, DMCS50, DMSCS40, DMSCS50, DMW40, DMW52
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Thickness (mm):
- 12
- Total length (mm):
- 572
- Hole spacing (mm):
- 136
- Suitable bolts:
- 3x 1801235810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Menke no.:
- 111003
- Designation:
- SB56DL
- Picture no.:
- 7
- suitable for plough body:
- B20, B30, B40, BS20, BS40, BS42, CS40, M50, M55, P50, P55, US35, US40, DuraMaxx Schnellwechselsystem Körper DMCS40, DMCS50, DMSCS40, DMSCS50, DMW40, DMW52
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Thickness (mm):
- 12
- Bolts with nuts included:
- 3 x 1801235810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 7
- suitable for plough body:
- B20, B30, B40, BS20, BS40, BS42, CS40, M50, M55, P50, P55, US35, US40, DuraMaxx Schnellwechselsystem Körper DMCS40, DMCS50, DMSCS40, DMSCS50, DMW40, DMW52
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 1801233VLE
- Menke no.:
- 258478
- Designation:
- SB58D R
- Picture no.:
- 7
- suitable for plough body:
- DMCS40, DMCS50, DMSCS40, DMSCS50, DMW40, DMW52
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 1801233VLE
- Menke no.:
- 258477
- Designation:
- SB58D L
- Picture no.:
- 7
- suitable for plough body:
- DMCS40, DMCS50, DMSCS40, DMSCS50, DMW40, DMW52
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 4x 1801035810
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Menke no.:
- 49174
- Designation:
- BSRE
- Picture no.:
- 4
- suitable for plough body:
- BS20, BS40, BS42
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 4 x 1801035810
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Picture no.:
- 4
- suitable for plough body:
- BS20, BS40, BS42
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 4x 1801035810
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Menke no.:
- 49175
- Designation:
- BSLI
- Picture no.:
- 4
- suitable for plough body:
- BS20, BS40, BS42
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 4 x 1801035810
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Picture no.:
- 4
- suitable for plough body:
- BS20, BS40, BS42
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 4x 1801035810
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Menke no.:
- 260691
- Designation:
- BS/WR
- Picture no.:
- 5
- suitable for plough body:
- BS20, BS40, BS42
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 4 x 1801035810
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Picture no.:
- 5
- suitable for plough body:
- BS20, BS40, BS42
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 4x 1801035810
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Menke no.:
- 260692
- Designation:
- BS/WL
- Picture no.:
- 5
- suitable for plough body:
- BS20, BS40, BS42
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 4 x 1801035810
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Picture no.:
- 5
- suitable for plough body:
- BS20, BS40, BS42
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 2x 1801035810
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Menke no.:
- 260693
- Designation:
- BS40/42R
- Picture no.:
- 3
- suitable for plough body:
- BS40, BS42
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 2 x 1801035810
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Picture no.:
- 3
- suitable for plough body:
- BS40, BS42
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Total length (mm):
- 677
- Suitable bolts:
- 2x 1801035810
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Menke no.:
- 260694
- Designation:
- BS40/42L
- Picture no.:
- 3
- suitable for plough body:
- BS40, BS42
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 2 x 1801035810
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Picture no.:
- 3
- suitable for plough body:
- BS40, BS42
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 2x 1801035810
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Designation:
- BS40/42R
- Picture no.:
- 2
- suitable for plough body:
- BS40, BS42
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 2 x 1801035810
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Picture no.:
- 2
- suitable for plough body:
- BS40, BS42
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 2x 1801035810
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Menke no.:
- 260696
- Designation:
- BS40/42L
- Picture no.:
- 2
- suitable for plough body:
- BS40, BS42
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 2 x 1801035810
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Picture no.:
- 2
- suitable for plough body:
- BS40, BS42
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 3x 1801045810
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Menke no.:
- 49184
- Designation:
- BS42R
- Picture no.:
- 1
- suitable for plough body:
- BS42
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 3 x 1801045810
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Picture no.:
- 1
- suitable for plough body:
- BS42
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Total length (mm):
- 985
- Suitable bolts:
- 3x 1801045810
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Menke no.:
- 49185
- Designation:
- BS42L
- Picture no.:
- 1
- suitable for plough body:
- BS42
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 3 x 1801045810
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Picture no.:
- 1
- suitable for plough body:
- BS42
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 3x 1801035810
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Menke no.:
- 66429
- Designation:
- B2KR
- Picture no.:
- 6
- suitable for plough body:
- B20, B25, B25H, B30, B35, B40, BS20, BS40, BS42, D50, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 3 x 1801035810
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Picture no.:
- 6
- suitable for plough body:
- B20, B25, B25H, B30, B35, B40, BS20, BS40, BS42, D50, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 3x 1801035810
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Menke no.:
- 93823
- Designation:
- B2KL
- Picture no.:
- 6
- suitable for plough body:
- B20, B25, B25H, B30, B35, B40, BS20, BS40, BS42, D50, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 3 x 1801035810
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Picture no.:
- 6
- suitable for plough body:
- B20, B25, B25H, B30, B35, B40, BS20, BS40, BS42, D50, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- To fit:
- Lemken
- Suitable bolts:
- 3x 1801035810
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Verstärkungsvariante:
- Hartmetall
- Designation:
- B2KR
- Picture no.:
- 6
- suitable for plough body:
- B20, B25, B25H, B30, B35, B40, BS20, BS40, BS42, D50, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 3x 1801035810
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Menke no.:
- 260182
- Designation:
- B2KHR
- Picture no.:
- 6
- suitable for plough body:
- B30, B35, B40, BS20, BS40, BS42, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 3 x 1801035810
- Assembly notes:
- Streichbleche und Streifen:
Beim Wechsel der Streichbleche und Streifen alle Schrauben wechselweise anziehen um Spannungen und Brüche der Bauteile zu vermeiden. Verwenden Sie Pappscheiben zum Ausgleich von Maßtoleranzen an Streichblechen und Streichblech-Vorderteilen um Spannungen und Risse in den Bauteilen zu verhindern. Die Schrauben und Muttern nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse). - Designation:
- B2KHR
- Picture no.:
- 6
- suitable for plough body:
- B30, B35, B40, BS20, BS40, BS42, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 3x 1801035810
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Designation:
- B2KHL
- Picture no.:
- 6
- suitable for plough body:
- B30, B35, B40, BS20, BS40, BS42, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 3 x 1801035810
- Assembly notes:
- Streichbleche und Streifen:
Beim Wechsel der Streichbleche und Streifen alle Schrauben wechselweise anziehen um Spannungen und Brüche der Bauteile zu vermeiden. Verwenden Sie Pappscheiben zum Ausgleich von Maßtoleranzen an Streichblechen und Streichblech-Vorderteilen um Spannungen und Risse in den Bauteilen zu verhindern. Die Schrauben und Muttern nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse). - Designation:
- B2KHL
- Picture no.:
- 6
- suitable for plough body:
- B30, B35, B40, BS20, BS40, BS42, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- To fit:
- Lemken
- Suitable bolts:
- 3x 1801035810
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Verstärkungsvariante:
- Hartmetall
- Designation:
- B2KL
- Picture no.:
- 6
- suitable for plough body:
- B20, B25, B25H, B30, B35, B40, BS20, BS40, BS42, D50, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Thickness (mm):
- 12
- Dimensions (mm):
- 420 x 120
- Width (mm):
- 120
- Length (mm):
- 420
- Suitable bolts:
- 2x 1801235810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Menke no.:
- 260047
- Designation:
- A42
- Picture no.:
- 9
- suitable for plough body:
- B20, B25, B25H, B30, B35, B40, BS20, BS40, BS42, C30, C32, C40, CS40, D50, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 2 x 1801235810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 9
- suitable for plough body:
- B20, B25, B25H, B30, B35, B40, BS20, BS40, BS42, C30, C32, C40, CS40, D50, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Thickness (mm):
- 12
- Width (mm):
- 120
- Length (mm):
- 420
- Suitable bolts:
- 2x 1801235810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Designation:
- A42
- Picture no.:
- 9
- suitable for plough body:
- B20, B25, B25H, B30, B35, B40, BS20, BS40, BS42, C30, C32, C40, CS40, D50, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Width (mm):
- 120
- Length (mm):
- 360
- Suitable bolts:
- 2x 1801235810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Designation:
- A36
- Picture no.:
- 9
- suitable for plough body:
- B20, B25, B25HB, BS20, BS40, D30, US35
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 2 x 1801235810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 9
- suitable for plough body:
- B20, B25, B25HB, BS20, BS40, D30, US35
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 2x 1801235810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Menke no.:
- 260153
- Designation:
- A36H
- Picture no.:
- 9
- suitable for plough body:
- B20, B25, B25H, B30, B35, B40, BS20, BS40, BS42, D50, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 2 x 1801235810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 9
- suitable for plough body:
- B20, B25, B25H, B30, B35, B40, BS20, BS40, BS42, D50, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Thickness (mm):
- 12
- Width (mm):
- 180
- Length (mm):
- 420
- Suitable bolts:
- 2x 1801235812
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Menke no.:
- 263999
- Designation:
- A42H
- Picture no.:
- 9
- suitable for plough body:
- B20, B25, B25H, B30, BS20, BS40, C30, C32, US35, B35, B40, BS42, C40, CS40, D50, M50, M55, P50, P55, US40,
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 2x 1801235810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Menke no.:
- 53854
- Designation:
- SC18
- Picture no.:
- 11
- suitable for plough body:
- B20, B25, B25H, B30, B35, B40, BS20, BS40, BS42, C30, C32, C40, CS40, D50, M50, M55, P50, P55, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 2x 1801035810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Designation:
- AS2R
- Picture no.:
- 13
- suitable for plough body:
- B20, B25, B25H, B30, B35, B40, BS20, BS40, BS42, C30, C32, C40, CS40, D50, M50, M55, P50, P55, US35, US40, DuraMaxx Schnellwechselsystem Körper DMCS40, DMCS50, DMSCS40, DMSCS50, DMW40, DMW52
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 2 x 1801035810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 13
- suitable for plough body:
- B20, B25, B25H, B30, B35, B40, BS20, BS40, BS42, C30, C32, C40, CS40, D50, M50, M55, P50, P55, US35, US40, DuraMaxx Schnellwechselsystem KörperDMCS40, DMCS50, DMSCS40, DMSCS50, DMW40, DMW52
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 2x 1801035810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Designation:
- AS2L
- Picture no.:
- 13
- suitable for plough body:
- B20, B25, B25H, B30, B35, B40, BS20, BS40, BS42, C30, C32, C40, CS40, D50, M50, M55, P50, P55, US35, US40, DuraMaxx Schnellwechselsystem Körper DMCS40, DMCS50, DMSCS40, DMSCS50, DMW40, DMW52
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 2 x 1801035810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 13
- suitable for plough body:
- B20, B25, B25H, B30, B35, B40, BS20, BS40, BS42, C30, C32, C40, CS40, D50, M50, M55, P50, P55, US35, US40, DuraMaxx Schnellwechselsystem Körper DMCS40, DMCS50, DMSCS40, DMSCS50, DMW40, DMW52
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 2x 1801035810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Designation:
- AK10R
- Picture no.:
- 8
- suitable for plough body:
- B20, B25, B25H, B30, B35, B40, BS20, BS40, BS42, C30, C32, C40, CS40, D50, M50, M55, P50, P55, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 2 x 1801035810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 8
- suitable for plough body:
- B20, B25, B25H, B30, B35, B40, BS20, BS40, BS42, C30, C32, C40, CS40, D50, M50, M55, P50, P55, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 2x 1801035810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Menke no.:
- 260680
- Designation:
- AK10L
- Picture no.:
- 8
- suitable for plough body:
- B20, B25, B25H, B30, B35, B40, BS20, BS40, BS42, C30, C32, C40, CS40, D50, M50, M55, P50, P55, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 2 x 1801035810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 8
- suitable for plough body:
- B20, B25, B25H, B30, B35, B40, BS20, BS40, BS42, C30, C32, C40, CS40, D50, M50, M55, P50, P55, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- To fit:
- Lemken
- Suitable bolts:
- 3x 1801040812
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Verstärkungsvariante:
- Aufpanzerung
- Designation:
- AK10R
- Picture no.:
- 8
- suitable for plough body:
- B20, B25, B25H, B30, B35, B40, BS20, BS40, BS42, C30, C32, C40, CS40, D50, M50, M55, P50, P55, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- To fit:
- Lemken
- Suitable bolts:
- 3x 1801040812
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Verstärkungsvariante:
- Aufpanzerung
- Designation:
- AK10L
- Picture no.:
- 8
- suitable for plough body:
- B20, B25, B25H, B30, B35, B40, BS20, BS40, BS42, C30, C32, C40, CS40, D50, M50, M55, P50, P55, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 2x 1801035810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Menke no.:
- 51186
- Designation:
- E4R
- Picture no.:
- 14
- suitable for plough body:
- DuraMaxx Schnellwechselsystem Körper DMCS40, DMCS50, DMSCS40, DMSCS50, DMW40, DMW52
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 2 x 1801035810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 14
- suitable for plough body:
- DuraMaxx Schnellwechselsystem Körper DMCS40, DMCS50, DMSCS40, DMSCS50, DMW40, DMW52
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 2x 1801035810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Menke no.:
- 51187
- Designation:
- E4L
- Picture no.:
- 14
- suitable for plough body:
- DuraMaxx Schnellwechselsystem Körper DMCS40, DMCS50, DMSCS40, DMSCS50, DMW40, DMW52
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 2 x 1801035810
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 14
- suitable for plough body:
- DuraMaxx Schnellwechselsystem Körper DMCS40, DMCS50, DMSCS40, DMSCS50, DMW40, DMW52
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 1x 56017 3015741
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Menke no.:
- 166600
- Designation:
- SCR11R
- Picture no.:
- 15
- suitable for plough body:
- B20, B25, B25H, B30, B35, B40, BS20, BS40, BS42, C30, C32, C40, D50, M50, M55, P50, P55, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 1x 56017 3015741
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Designation:
- SCR11L
- Picture no.:
- 15
- suitable for plough body:
- B20, B25, B25H, B30, B35, B40, BS20, BS40, BS42, C30, C32, C40, D50, M50, M55, P50, P55, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 1801235812
- suitable for plough body:
- BS40, BS42, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Special item: cannot be returned or cancelled. Additional shipping costs may be incurred. Delivery time subject to availability from the supplier.
- Suitable bolts:
- 1801235812
- suitable for plough body:
- BS40, BS42, US35, US40
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Special item: cannot be returned or cancelled. Additional shipping costs may be incurred. Delivery time subject to availability from the supplier.
OEM numbers are provided for reference purposes only. GRANIT replacement parts are not intended to be sold as OEM parts. Wilhelm Fricke SE is the manufacturer of all own brand items. All prices are in $, excl. VAT. Errors reserved. Delivery subject to availability.