Body N4
- Suitable bolts:
- 3x 1801235HU10
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Menke no.:
- 20759
- Picture no.:
- 11
- suitable for plough body:
- Typ H4
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 3 x 1801235HU10
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 11
- suitable for plough body:
- Typ H4
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 3x 1801235HU10
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 11
- suitable for plough body:
- Typ H4
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 3 x 1801235HU10
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 11
- suitable for plough body:
- Typ H4
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 3x 1801235HU10
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Menke no.:
- 20761
- Picture no.:
- 10
- suitable for plough body:
- Typ H4
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 3 x 1801235HU10
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 10
- suitable for plough body:
- Typ H4
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 3x 1801235HU10
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 10
- suitable for plough body:
- Typ H4
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 3 x 1801235HU10
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 10
- suitable for plough body:
- Typ H4
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 3x 1801233HU
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Menke no.:
- 90315
- Picture no.:
- 6
- suitable for plough body:
- H4
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 3 x 1801233HU
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 6
- suitable for plough body:
- H4
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 3x 1801233HU
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Menke no.:
- 66424
- Picture no.:
- 7
- suitable for plough body:
- H4
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 3 x 1801233HU
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 7
- suitable for plough body:
- H4
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- To fit:
- Kuhn (Huard)
- Suitable bolts:
- 3x 1801238HU
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Verstärkungsvariante:
- Hartmetall & Aufpanzerung
- Picture no.:
- 7
- suitable for plough body:
- H4
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Thickness (mm):
- 15,2
- Dimensions (mm):
- 548 x 111 x 15.2
- Width (mm):
- 111
- Total length (mm):
- 548
- Length (mm):
- 548
- To fit:
- Kuhn
- Suitable bolts:
- 3x 1801233HU
- Version:
- • Large hard metal plates on the upper side guarantee maximum wear protection
• Hard metal plate on the underside is embedded in a triangular shape in the base body— breakages are almost impossible
• Complex hardening process: hardening after the soldering process maintains full hardness in the base body
• Hardness in the base body: 46 HRc throughout (other aftermarket products: 36 HRc)
• Sophisticated soldering process — mixing of soldering material is crucial
• Low-wear design
• Excellent price/performance ratio
• Easy insertion into the soil and lower fuel consumption thanks to consistently sharp tools
• Significantly increased durability compared to standard tools (factor 7-10 depending on the soil)
• No readjustment of tool depth due to wear
• Time and cost savings due to fewer share changes
• MADE IN GERMANY - Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Verstärkungsvariante:
- Endurance Carbide
- Picture no.:
- 7
- suitable for plough body:
- BL, C4, C6, H, HB, HC, J, J PL, L, J, N4, N6, P, RB, RM, V YL, YLR
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Thickness (mm):
- 18
- Dimensions (mm):
- 548 x 131 x 18
- Width (mm):
- 131
- Length (mm):
- 548
- To fit:
- Kuhn
- Suitable bolts:
- 3x 1801233HU
- Version:
- • Large hard metal plates on the upper side guarantee maximum wear protection
• Hard metal plate on the underside is embedded in a triangular shape in the base body - breakages are almost impossible
• Complex hardening process: hardening after the soldering process maintains full hardness in the base body
• Hardness in the base body: 46 HRc throughout (other aftermarket products: 36 HRc)
• Sophisticated soldering process - mixing of soldering material is crucial
• Low-wear design
• Top performance at a great price
• Easy insertion into the soil and lower fuel consumption thanks to consistently sharp tools
• Significantly longer service life compared to standard tools (a factor of 7-10 depending on the soil)
• No readjustment of tool depth due to wear
• Time and cost savings due to fewer share changes
• Made in Germany - Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Verstärkungsvariante:
- Endurance Carbide
- Picture no.:
- 6
- suitable for plough body:
- BL, C4, C6, H, HB, HC, J, J PL, L, J, N4, N6, P, RB, RM, V YL, YLR
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 1x 1801233HU
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Menke no.:
- 263994
- Picture no.:
- 8
- suitable for plough body:
- Universella
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 1 x 1801233HU
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 8
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 2x 1801233HU
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Menke no.:
- 263995
- Picture no.:
- 8
- suitable for plough body:
- Universella
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 2 x 1801233HU
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 8
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 4x 1801230HU10 + 3x 1801245HU10
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Menke no.:
- 51117
- Picture no.:
- 1
- suitable for plough body:
- N4
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 4 x 1801230HU10 + 3 x 1801245HU10
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Picture no.:
- 1
- suitable for plough body:
- N4
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 4x 1801230HU10 + 3x 1801245HU10
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Menke no.:
- 51118
- Picture no.:
- 1
- suitable for plough body:
- N4
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 4 x 1801230HU10 + 3 x 1801245HU10
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Picture no.:
- 1
- suitable for plough body:
- N4
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 2x 1801235HU10
- Picture no.:
- 9
- suitable for plough body:
- BL, C4, C6, H, HB, HC, L, N4, N6, P, RB, SHC, SL, SN, YL, YLR
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 2x 1801235HU10
- Picture no.:
- 9
- suitable for plough body:
- BL, C4, C6, H, HB, HC, L, N4, N6, P, RB, SHC, SL, SN, YL, YLR
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 2x 1801235HU10
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Menke no.:
- 51127
- Picture no.:
- 2
- suitable for plough body:
- N4
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 2 x 1801235HU10
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Picture no.:
- 2
- suitable for plough body:
- N4
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 2x 1801235HU10
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Menke no.:
- 51128
- Picture no.:
- 2
- suitable for plough body:
- N4
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 2 x 1801235HU10
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Picture no.:
- 2
- suitable for plough body:
- N4
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- To fit:
- Kuhn (Huard)
- Suitable bolts:
- 2x 1801240KHU
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Verstärkungsvariante:
- Hartmetall
- Picture no.:
- 5
- suitable for plough body:
- N4
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- To fit:
- Kuhn (Huard)
- Suitable bolts:
- 2x 1801240KHU
- Assembly notes:
- Mouldboards and slats:
When changing mouldboards and slats, tighten all bolts to prevent stresses and cracks in the components. Use cardboard discs to compensate for mouldboard and mouldboard front part dimensional tolerances in order to prevent stresses and cracks in the components. Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks). - Verstärkungsvariante:
- Hartmetall
- Picture no.:
- 2
- suitable for plough body:
- N4
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Hole spacing (mm):
- 40
- To fit:
- Kuhn
- Suitable bolts:
- 2x 1801238KV
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Menke no.:
- 20654
- Picture no.:
- 3
- suitable for plough body:
- BL, C4, C6, C7, C8, H, HB, HC, J, JV, L, LSELECT, N4, P, RB, RM, SHC, SK, SL, SN, V, VL, kropp
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 2 x 1801238KV
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 3
- suitable for plough body:
- BL, C4, C6, C7, C8, H, HB, HC, J, JV, L, LSELECT, N4, P, RB, RM, SHC, SK, SL, SN, V, VL, kropp
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 2x 1801238KV
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Menke no.:
- 57697
- Picture no.:
- 3
- suitable for plough body:
- BL, C4, C6, C7, C8, H, HB, HC, J, JV, L, LSELECT, N4, P, RB, RM, SHC, SK, SL, SN, V, VL, kropp
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 2 x 1801238KV
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 3
- suitable for plough body:
- BL, C4, C6, C7, C8, H, HB, HC, J, JV, L, LSELECT, N4, P, RB, RM, SHC, SK, SL, SN, V, VL, kropp
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Thickness (mm):
- 30
- Width (mm):
- 93,3
- Total length (mm):
- 225,5
- Length (mm):
- 225,5
- Suitable bolts:
- 2x 1801245812
- Version:
- • Large hard metal plates on the upper side guarantee maximum wear protection
• Hard metal plate on the underside is embedded in a triangular shape in the base body— breakages are almost impossible
• Complex hardening process: hardening after the soldering process maintains full hardness in the base body
• Hardness in the base body: 46 HRc throughout (other aftermarket products: 36 HRc)
• Sophisticated soldering process - mixing of soldering material is crucial
• Low-wear design
• Top performance at a great price
• Easy insertion into the soil and lower fuel consumption thanks to consistently sharp tools
• Significantly longer service life compared to standard tools (a factor of 7-10 depending on the soil)
• No readjustment of tool depth due to wear
• Time and cost savings due to fewer share changes
• Made in Germany - Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Verstärkungsvariante:
- Endurance Carbide
- Picture no.:
- 3
- suitable for plough body:
- BL, C4, C6, C7, C8, H, HB, HC, J, JV, L, LS
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Thickness (mm):
- 30
- Width (mm):
- 93,3
- Total length (mm):
- 225,5
- Length (mm):
- 225,5
- Suitable bolts:
- 2x 1801245812
- Version:
- • Large hard metal plates on the upper side guarantee maximum wear protection
• Hard metal plate on the underside is embedded in a triangular shape in the base body— breakages are almost impossible
• Complex hardening process: hardening after the soldering process maintains full hardness in the base body
• Hardness in the base body: 46 HRc throughout (other aftermarket products: 36 HRc)
• Sophisticated soldering process - mixing of soldering material is crucial
• Low-wear design
• Top performance at a great price
• Easy insertion into the soil and lower fuel consumption thanks to consistently sharp tools
• Significantly longer service life compared to standard tools (a factor of 7-10 depending on the soil)
• No readjustment of tool depth due to wear
• Time and cost savings due to fewer share changes
• Made in Germany - Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Verstärkungsvariante:
- Endurance Carbide
- Picture no.:
- 3
- suitable for plough body:
- BL, C4, C6, C7, C8, H, HB, HC, J, JV, L, LS
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- To fit:
- Kuhn
- Suitable bolts:
- 2x 1801238KV
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Menke no.:
- 20655
- Picture no.:
- 3
- suitable for plough body:
- BL, C4, C6, C7, C8, H, HB, HC, J, JV, L, LSELECT, N4, P, RB, RM, SHC, SK, SL, SN, V, VL, kropp
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 2 x 1801238KV
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 3
- suitable for plough body:
- BL, C4, C6, C7, C8, H, HB, HC, J, JV, L, LSELECT, N4, P, RB, RM, SHC, SK, SL, SN, V, VL, kropp
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 2x 1801238KV
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Menke no.:
- 57698
- Picture no.:
- 3
- suitable for plough body:
- BL, C4, C6, C7, C8, H, HB, HC, J, JV, L, LSELECT, N4, P, RB, RM, SHC, SK, SL, SN, V, VL, kropp
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 2 x 1801238KV
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 3
- suitable for plough body:
- BL, C4, C6, C7, C8, H, HB, HC, J, JV, L, LSELECT, N4, P, RB, RM, SHC, SK, SL, SN, V, VL, kropp
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Thickness (mm):
- 10
- To fit:
- Kuhn (Huard)
- Suitable bolts:
- 2x 1801245812
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Menke no.:
- 226092
- Verstärkungsvariante:
- Hartmetall & Aufpanzerung
- Picture no.:
- 3
- suitable for plough body:
- BL, C4, C6, C7, C8, H, HB, HC, J, JV, L, LSELECT, N4, P, RB, RM, SHC, SK, SL, SN, V, VL, kropp
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Thickness (mm):
- 10
- To fit:
- Kuhn (Huard)
- Suitable bolts:
- 2x 1801245812
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Menke no.:
- 226091
- Verstärkungsvariante:
- Hartmetall & Aufpanzerung
- Picture no.:
- 3
- suitable for plough body:
- BL, C4, C6, C7, C8, H, HB, HC, J, JV, L, LSELECT, N4, P, RB, RM, SHC, SK, SL, SN, V, VL, kropp
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 2x 1801238KV
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Menke no.:
- 57695
- Picture no.:
- 3a
- suitable for plough body:
- Olympic
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 2 x 1801238KV
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 3a
- suitable for plough body:
- Olympic
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 2x 1801238KV
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Menke no.:
- 57696
- Picture no.:
- 3a
- suitable for plough body:
- Olympic
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Total length (mm):
- 308,5
- Hole spacing (mm):
- 49,5
- Bolts with nuts included:
- 2 x 1801238KV
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 3a
- suitable for plough body:
- Olympic
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 4x 1801435HU10
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Menke no.:
- 20710
- Picture no.:
- 5
- suitable for plough body:
- C, N, P, V, L
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 4 x 1801435HU10
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 5
- suitable for plough body:
- C, N, P, V, L
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 4x 1801435HU10
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Menke no.:
- 20711
- Picture no.:
- 5
- suitable for plough body:
- C, N, P, V, L
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 4 x 1801435HU10
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 5
- suitable for plough body:
- C, N, P, V, L
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 4x 1801435HU10
- Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Picture no.:
- 5
- suitable for plough body:
- C, N, P, V
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
Special item: cannot be returned or cancelled. Additional shipping costs may be incurred. Delivery time subject to availability from the supplier.
- Suitable bolts:
- 4x 1801435HU10
- Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Picture no.:
- 5
- suitable for plough body:
- C, N, P, V
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- To fit:
- Kuhn (Huard)
- Suitable bolts:
- 4x 1801440HU12
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Verstärkungsvariante:
- Hartmetall
- Picture no.:
- 5
- suitable for plough body:
- C, N, P, V, L
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- To fit:
- Kuhn (Huard)
- Suitable bolts:
- 4x 1801440HU12
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Verstärkungsvariante:
- Hartmetall
- Picture no.:
- 5
- suitable for plough body:
- C, N, P, V
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
Special item: cannot be returned or cancelled. Additional shipping costs may be incurred. Delivery time subject to availability from the supplier.
- To fit:
- Kuhn
- Suitable bolts:
- 4x 1801435HU10
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Menke no.:
- 186058
- Picture no.:
- 5
- suitable for plough body:
- C, N, P
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 4 x 1801435HU10
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 5
- suitable for plough body:
- C, N, P
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- To fit:
- Kuhn
- Suitable bolts:
- 4x 1801435HU10
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Menke no.:
- 81617
- Picture no.:
- 5
- suitable for plough body:
- C, N, P
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 4 x 1801435HU10
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 5
- suitable for plough body:
- C, N, P
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 4x 1801435HU10
- Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Picture no.:
- 5
- suitable for plough body:
- C, N, P
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
Special item: cannot be returned or cancelled. Additional shipping costs may be incurred. Delivery time subject to availability from the supplier.
- Suitable bolts:
- 4x 1801435HU10
- Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Picture no.:
- 5
- suitable for plough body:
- C, N, P
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
Special item: cannot be returned or cancelled. Additional shipping costs may be incurred. Delivery time subject to availability from the supplier.
- To fit:
- Kuhn (Huard)
- Suitable bolts:
- 4x 1801440HU12
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Verstärkungsvariante:
- Hartmetall
- Picture no.:
- 5
- suitable for plough body:
- C, N, P
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- To fit:
- Kuhn (Huard)
- Suitable bolts:
- 4x 1801440HU12
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Verstärkungsvariante:
- Hartmetall
- Picture no.:
- 5
- suitable for plough body:
- C, N, P
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Total length (mm):
- 620
- Suitable bolts:
- 1801435HU10
- Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Picture no.:
- 5a
- suitable for plough body:
- N4, VL, V- LP
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 1801435HU10
- Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Picture no.:
- 5a
- suitable for plough body:
- N4, VL, V- LP
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 4x 1801435HU10
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 5a
- suitable for plough body:
- C, N, P
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 4x 1801435HU10
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 5a
- suitable for plough body:
- C, N, P
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 1801435HU10
- Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Picture no.:
- 5a
- suitable for plough body:
- N4, VL, V-LP
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 1801435HU10
- Assembly notes:
- Die Schrauben und Mutter nicht mit einem Druckluftwerkzeug anziehen, da dieses das Verschleißteil beschädigen kann (Spannungsrisse).
- Picture no.:
- 5a
- suitable for plough body:
- N4, VL, V-LP
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 2x 1801238KV
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 4
- suitable for plough body:
- Semi-Marathon
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 2 x 1801238KV
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 4
- suitable for plough body:
- Semi-Marathon
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Suitable bolts:
- 2x 1801238KV
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 4
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- Bolts with nuts included:
- 2 x 1801238KV
- Assembly notes:
- Do not tighten bolts and nuts with a compressed air tool as this may damage the wearing part (stress cracks).
- Picture no.:
- 4
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
Show more details
- suitable for plough body:
- C4, N6, N4, L, P, RM
- Manufacturer:
- Wilhelm Fricke SE, Zum Kreuzkamp 7, 27404 Heeslingen, Deutschland, www.granit-parts.com, [email protected]
OEM numbers are provided for reference purposes only. GRANIT replacement parts are not intended to be sold as OEM parts. Wilhelm Fricke SE is the manufacturer of all own brand items. All prices are in $, excl. VAT. Errors reserved. Delivery subject to availability.